INSTALLATION MANUAL MARINER® OUTDOOR SPEAKERS MARINER 54 | MARINER 54 SST | MARINER 56 MARINER 64 | MARINER 64 SST | MARINER 66 | MARINER 86
PRODUCT DESCRIPTION TYPES OF WIRE Thank you for purchasing Sonance Mariner weatherresistant speakers. When installing Sonance Mariner Outdoor Speakers careful consideration should be made when determining speaker placement and what guage wire should be used. Please refer to the wiring chart (see figure 2) to determine which size wire to use over the given distance between the amplifier/ receiver and the speakers.
4. Feed the speaker wires from the bracket into the wire entry grommet on the back of the speaker, through the wire tunnel and out the opening on the speaker’s front panel (see figure 7). • The grommet forms a water-resistant seal around the speaker wire. • Make sure there is enough slack in the wire to allow the speaker to pivot on the bracket.
SPECIFICATIONS Mariner 54 Tweeter: Woofer: Frequency Response: Impedance: Power Handling: Sensitivity: Environmental: Environment Temp: Dimensions (WxHxD): Grille: Shipping Weight: Mariner 54 SST Tweeter: Woofer: Frequency Response: Impedance: Power Handling: Sensitivity: Environmental: Environment Temp: Dimensions (WxHxD): Grille: Shipping Weight: Mariner 56 Tweeter: Woofer: Frequency Response: Impedance: Power Handling: Sensitivity: Environmental: Environment Temp: Dimensions (WxHxD): Grille: Shipping Wei
