VISUAL PERFORMANCE RETROFIT ENCLOSURE INSTRUCTION MANUAL
FOR BI-WIRED AND SINGLE STEREO SPEAKERS INTRODUCTION Sonance Retrofit Speaker Enclosures reduce sound transmission into rooms that are adjacent to speakers mounted in walls or in ceilings. For the enclosures to be effective it is important that they are installed according the following directions to ensure a tight seal with the speaker. Remove the jumpers that connect the two sets of terminals on the speaker for bi-wired models.
Refer to the table below to determine total speaker depth when a retrofit enclosure is used. MODEL DEPTH WITH ENCLOSURE VP42 VP46 3 7/8” (97.5mm) VP48 VP42R VP46R VP46R SST 5 13/16” (147mm) VP48R VP62 VP66 VP68 3 7/8” (98mm) VP66 SST VPXT6 VP62LCR VP66LCR 3 15/16” (99.5mm) VP62R VP64R VP66R VP68R 5 7/8” (149mm) VP62R SST VP66R SST VPXT6R VPXT6R SST 4 7/8” (122.
LIMITED FIVE (5) YEAR WARRANTY Sonance warrants to the first end-user purchaser that this Sonance-brand product (“Product”), when purchased from an authorized Sonance Dealer/Distributor, will be free from defective workmanship and materials for the period stated below. Sonance will at its option and expense during the warranty period, either repair the defect or replace the Product with a new or remanufactured Product or a reasonable equivalent.