User Manual

Soundbar Connectors for Wall Mount
Brackets
Choose and attach the correct soundbar connector to the
display attachment rails for your desired depth. The at soundbar
connector will align with 2 5/8” (65mm) deep displays. The
recessed soundbar connector will align with displays from 1 7/32” -
2 3/32” (31.74 - 53mm) deep.
Attaching the Soundbar Connector
2
Option 1:
Flat Soundbar Connector
Option 2:
Recessed Soundbar Connector
Option 1: Flat Soundbar Connector
Option 3:
Table Top Installation
Option 4:
Key Hole Wall Mount
A
Placement and Options Overview
Sonance Soundbars are designed to attach directly to most at
panel display wall mounts using VESA mounting points with the
included attachment rails, connectors, and hardware.
• Installation Option 1
Mounting to TV display mount using FLAT soundbar connector.
The at soundbar connector will align with displays 2 5/8”
(65mm) deep.
• Installation Option 2
Mounting to TV display mount using RECESSED soundbar
connector. The recessed soundbar connector will align with
displays from 1 7/32” - 2 3/32” (31.74mm - 53mm) deep.
• Installation Option 3
Table top installation. Soundbars can additionally be cabinet
or table top mounted using the rubber feet included in your
box contents.
• Installation Option 4
Key hole wall mounting is an alternative option accomplished
by using the key hole wall mounts combined with the wall
mount template.
Option 1:
Flat Soundbar Connector
Option 2:
Recessed Soundbar Connector
Run three sets of speaker wires: Left channel, Center channel,
Right channel as well as the necessary video cable from the
amplier to the display location. Whenever possible leave extra
wire to make it easy to connect the wire to the Soundbar spring
terminals prior to hanging the display. Extra wire can then be
pushed back into the wall.
NOTE: CONSULT LOCAL BUILDING CODES BEFORE RUNNING SPEAKER
AND ELECTRICAL WIRES THROUGH WALLS.
NOTE: FOR INSTALLATION OPTIONS 3 AND 4, BEGIN ON PAGE 6.
Option 1 - Flat Soundbar Connector
The at soundbar connector will align with 2 5/8” (65mm) displays.
Use the A. screws to connect to the display attachment rails.