User Manual

7
Calibrating The Soundbar
Soundbar installation is now complete and ready for audio system
calibration. Using a subwoofer is recommended. The subwoofer
crossover frequency should be set to 100Hz. We recommend the
Sonance VPSUB with a Sonance DSP 2-150 MKII amplier or a
Sonance Impact cabinet subwoofer. The Sonance VP46R SST/
SUR, VP66R SST/SUR, and VP86 SST/SUR are perfect surround
speakers to pair with the soundbar.
Use test tones in the surround processor to verify Left/Center/Right
channels have been properly connected and to set levels.
Your soundbar will sound great out of the box, however, as with any
high performance loudspeaker, a 40 hour play period will “break in”
the drivers and enhance the overall listening experience. This only
needs to be done once.
Adjustable Width Soundbars
SB46 M
Height: 5 9/32” (134mm)
Depth: 2 9/16” (65mm)
Adjustable Width: 43 7/8” to 59 5/8” (1114mm to 1514mm)
Display Size Range: 50” to 65” diagonal (127cm to 165cm)
SB46 L
Height: 5 9/32” (134mm)
Depth: 2 9/16” (65mm)
Adjustable Width: 61 1/2” to 77 5/16” (1562mm to 1964mm)
Display Size Range: 70” to 80” diagonal (178cm to 203cm)
Height
Adjustable Width
Depth
Height
Width
Depth
Mounting The Display
Carefully mount the display and Soundbar to the third party TV wall
mount. This will require two people. When lifting be careful not to
place too much pressure on, or twist, the Soundbar. This could
bend the attachment rails.
NOTE: WHEN LIFTING THE DISPLAY AND SOUNDBAR TOGETHER
BE CAREFUL NOT TO PUT TOO MUCH PRESSURE ON THE
SOUNDBAR ALONE.
Dimensions
Soundbars
SB46-55
Height: 5 9/32” (134mm)
Depth: 2 9/16” (65mm)
Width: 48 5/16” (1227mm)
SB46-75
Height: 5 9/32” (134mm)
Depth: 2 9/16” (65mm)
Width: 66” (1676mm)
SB46-65
Height: 5 9/32” (134mm)
Depth: 2 9/16” (65mm)
Width: 56 15/16” (1445mm)
SB46-85
Height: 5 9/32” (134mm)
Depth: 2 9/16” (65mm)
Width: 75 1/4” (1911mm)