User Manual
3
Display Spacers
Included with your soundbar are two 8mm thick wood display
spacers. The spacers allow the front surface of the display to be
in line with the ξ
at surface on the top edge of the soundbar. When
using the spacers carefully place the display on top of the spacers.
This will require two people. Be careful not to scratch the display.
spacers do not go under the soundbar.
Option 2 - Recessed Soundbar Connector
The recessed Soundbar connector will align with displays from 1
7/32β (31.74mm) to 2 3/32β (53mm) deep displays. Various depths
can be accomplished by using C. or D. screws accompanied by I.
washers and G. nuts. Use the A. screws to attached the connector
to the display attachment rails.
A
Option 2 - Recessed Soundbar Connector
Multiple Depth Options Using Nuts and Washers
Variable Depths for Various Display Thicknesses
G
C or D
Display Spacer
I
NOTE: IF THE SPACERS ARE NOT USED, THE FRONT SURFACE OF THE
DISPLAY WILL BE IN LINE WITH THE FRONT RADIUS OF THE SOUNDBAR
GRILLE. THIS IS DEPENDENT ON THE DISPLAY THICKNESS AND
INSTALLATION PREFERENCE.