User Manual

3
Introduction
Thank you for purchasing the Sonance Sonamp 2-100 or 12-50
amplifier. When properly installed, this amplifier will give you
many years of entertainment pleasure. To get the most out of your
new amplifier, please read this manual thoroughly before you
begin installation.
To achieve the best performance, Sonance recommends that this
amplifier be installed by a Sonance Authorized Dealer/Installer.
Box Contents
Your Sonamp 2-100 box should contain:
(1) Instruction Manual
(1) Sonamp 2-100 amplifier
(1) IEC power cord
(4) Feet
(2) Long rack ears
Your Sonamp 12-50 box should contain:
(1) Instruction Manual
(1) Sonamp 12-50 amplifier
(1) IEC power cord
(4) Feet
(2) Rack ears
Unpacking
Save the carton and polystyrene inserts for future safe transport in
case the amplifier is moved or requires shipping for repair.
Before proceeding with installation, locate the serial number on the
rear panel of the unit and note it here for future reference:
S/N:_________________________________________________________
Placement
Place the amplifier on a level surface, in an upright position, out
of direct sunlight and away from windows through which rain
may enter.
Situate the amplifier away from heat sources such as hot air ducts
or radiators. Be sure that the amplifier is adequately ventilated by
convection or suitable cabinet fans.
• Never place any object on or against the amplifier.
• Never operate the amplifier on a carpeted surface as this will
compromise ventilation.
• When the amplifier is installed in any cabinet, the front or back
must be open during operation. Alternately, install fans in the
cabinet to assure continuous ventilation.
SONAMP 2-100 & 12-50 MULTI-CHANNEL POWER AMPLIFIER INSTRUCTION MANUAL
FIGURE 2: SONAMP 12-50 MULTI-CHANNEL AMPLIFIER
LEVEL LEVEL
BRIDGE
OFF ON
MONOSTEREO
12-50
S/N
VOLTAGE TRIGGER
IN OUT
AUTO ON
OFF
IN
OUT
IN
OUT
1-LEFT 1-RIGHT
LEVEL LEVEL
BRIDGE
OFF ON
MONOSTEREO
LEVEL LEVEL
BRIDGE
OFF ON
MONOSTEREO
LEVEL LEVEL
BRIDGE
OFF ON
MONOSTEREO
LEVEL LEVEL
BRIDGE
OFF ON
MONOSTEREO
LEVEL LEVEL
BRIDGE
OFF ON
MONOSTEREO
2-LEFT 2-RIGHT 3-LEFT 3-RIGHT 4-LEFT 4-RIGHT 5-LEFT 5-RIGHT 6-LEFT 6-RIGHT
LOCAL
BUSS A
BUSS B
LOCAL
BUSS A
BUSS B
LOCAL
BUSS A
BUSS B
LOCAL
BUSS A
BUSS B
LOCAL
BUSS A
BUSS B
LOCAL
BUSS A
BUSS B
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
LEFT RIGHT LEFT RIGHT
BUSS INPUT A BUSS INPUT B
1 - LEFT
1 - RIGHT
BRIDGE
8 Ω MIN
CLASS 2 WIRING
T10AL / 250VAC
CAUTION
R
EPLACE FUSE ONLY WITH
SAME TYPE AND RATING
ATTENTION
REMPLACER UNIQUEMENT AVEC LE
M
EME TYPE ET CALIBRE DU FUSIBLE
2 - LEFT
2 - RIGHT
BRIDGE
CLASS 2 WIRING
3 - LEFT
3 - RIGHT
BRIDGE
CLASS 2 WIRING
5 - LEFT
5 - RIGHT
BRIDGE
CLASS 2 WIRING
6 - LEFT
6 - RIGHT
BRIDGE
CLASS 2 WIRING
4 - LEFT
4 - RIGHT
BRIDGE
CLASS 2 WIRING
VOLTAGE
AUDIO
3-30 VOLTS
AC or DC
8 Ω MIN 8 Ω MIN 8 Ω MIN 8 Ω MIN 8 Ω MIN
156 watts
AC 100-120V ~ 60Hz
AC 220-240V ~ 50Hz
FIGURE 1: SONAMP 2-100 MULTI-CHANNEL AMPLIFIER
1L 1R
2-100
1L 1R
12-50
2L 2R
3L 3R
4L 4R
5L 5R
6L 6R
IN
OUT
1-L 1-R
LEVEL LEVEL
BRIDGE
OFF ON
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
S/N
T5AL / 250VAC
2-100
AC 100-120V ~ 60Hz
CAUTION
R
EPLACE FUSE ONLY WITH
SAME TYPE AND RATING
ATTENTION
REMPLACER UNIQUEMENT AVEC LE
M
EME TYPE ET CALIBRE DU FUSIBLE
VOLTAGE TRIGGER
IN OUT
AUTO ON
OFF
1 - LEFT
1 - RIGHT
BRIDGE
CLASS 2 WIRING
VOLTAGE
AUDIO
3-30 VOLTS
AC or DC
8 Ω MIN
AC 220-240V ~ 50Hz
52 watts