User Manual
15
Specications
SONAMP DSP 2-150 MKII
NumberofChannels 2 (1 stereo pair)
Power Output - 8 ohms (Stereo) 150 Watts RMS per channel (all channels driven)
Power Output - 4 ohms (Stereo) 224 Watts RMS per channel (all channels driven)
Power Output - 8 ohms (Bridged) 473 Watts
FrequencyResponse 5Hz–50kHz,bandwidthlimited
Total Harmonic Distortion 0.07% (1kHz, 8 ohms) 0.06% (1kHz, 4 ohms)
SignaltoNoiseRatio -100dB(20Hz-20kHz)
Input Gain 29dB
Input Sensitivity 100mV for 1 Watt Output @8 ohms
1230mV for 150 Watts Output @8 ohms
Input Impedance 20k ohms
Loop Output Impedance 600 ohms
Maximum Source Input Voltage 2.9V VAC RMS
CommunicationProtocol TCP/IP(RJ-4510/100BaseT)
Power Consumption 120V AC
@8 ohms (sinewave, full power) 371 Watts (all channels driven)
@4 ohms (sinewave, full power) 392 Watts (all channels driven)
@8ohms(sinewave,1/8power) 72Watts(allchannelsdriven)
@4ohms(sinewave,1/8power) 74Watts(allchannelsdriven)
@Idle 17 Watts
@IP or IR standby 1.5 Watts
@Standby 0.48 Watts
Power Consumption 220V AC
@8 ohms (sinewave, full power) 359 Watts (all channels driven)
@4 ohms (sinewave, full power) 376 Watts (all channels driven)
@8ohms(sinewave,1/8power) 69Watts(allchannelsdriven)
@4ohms(sinewave,1/8power) 71Watts(allchannelsdriven)
@Idle 15 Watts
@IP or IR standby 1.1 Watts
@Standby 0.5 Watts
Heat Output
@8 ohms (sinewave, full power) 242 BTU (all channels driven)
@4 ohms (sinewave, full power) 314 BTU (all channels driven)
@8ohms(sinewave,1/8power) 118BTU(allchannelsdriven)
@4ohms(sinewave,1/8power) 124BTU(allchannelsdriven)
AC Voltage 100-120V@60Hz, 220-240V@50Hz
AC Fuse 5A (T5-AL)
RackSpaceRequirement 1U–1/2RackWidth
Dimensionsw/Feet(WxHxD) 85/8”x21/8”x1613/16”(219mmx54mmx427mm)
Dimensionsw/RackEarsw/oFeet(WxHxD) 19”x13/4”x1613/16”(482mmx44mmx427mm)
Shipping Weight 11 lbs (5.0kg)
CADFilesavailablefordownloadatwww.sonance.com/electronics/ampliers/dsp