User Manual
9
Connecting to Your SonARC Homepage
1.Theamplier’sfactorydefaultsettingshasDHCPsettoON.
2.Connecttheampliertoanetworkwitharouter.Makesurethe
computerandamplierareonthesamenetwork.
3.Turnontheamplier.
4.TheamplierwillbeissuedanIPaddressbytherouter.
5. Use an IP scanner to determine the IP address of the Sonance
DSPamplieronthenetwork.WerecommendFingapp
for IOS, Advanced IP Scanner for Windows devices and
LanScan for macOS.
6.Networkdeviceswillshowupandtheamplierwillbe
named Sonance.
7. Open Safari or Chrome.
8. In the URL address window at the top, enter the IP address of
theSonanceDSPampliertocongure.
SonARC Software
Network Connection Instructions
SonARC Legend
Toggle/
Pull-down Menu Free Type Field Single Action Menu
Equipment List
(1) Computer or tablet
(1) Network router with DHCP service enabled
(2) RJ-45 cables (one when using wireless)
SonARC Homepage
Setup Options
YourSonARCHomepagewillhavetwooptionsforsetup:Basic
SetupandAdvancedSetup.Ampliernamecanbeenteredby
the installer.
Basic Setup Page
This page is for basic setup of EQ, source and volume. To start,
click on the Basic Setup button.
DSP Preset Assignment
Assign Preset
Click on the individual channels to show the drop down menu
of preset options. Once you locate the preset for your Sonance
speakers click on the name to set the preset. Each Sonance
DSPamplierhas50slotswithpre-conguredDSPcurvesfor
Sonance speaker models pre-loaded. If the speaker model in your
applicationisnotonthepre-loadedlist,hundredsofDSPlesare
available for download from the Sonance website. Download the
presetleforadditionalSonancespeakermodelsat:
www.sonance.com/electronics/ampliers/dsp.
Input Source
This pull down menu allows you to select which input you would
like to assign to the channel.
Input Settings/Source Select
Input Name
Thisisauserenteredeldwithamaximumof15characters.
Usetheseeldstodescribethetypeofinputconnected.