Features 1. Passive WiFi sub woofer speakers, outputs clear sound, great bass and dynamic sound effects 2. Bluetooth 3.0, tirelessly stream music from any Bluetooth-enabled device with AVDP technology (Advanced Audio Distribution Profile) 3.30 feet/10 meter Bluetooth range 4. Full frequency FM radio 5. AUX input for connecting any audio device 6. LED Display 7. Supports USB flash drives or SD memory cards up to 32GB 8. Bass and Volume control 9.
Location of Controls plop NJQ amm 2 ¥ 1. DC 5V Mini USB battery charging port 2. ¢ Previous/rewind button 3. »i Play/pause button 4. wi Next/fast forward button 5.MODE button 6. EQ equalizer button 7. 3 Bluetooth button 8. LED charging indicator light 9. SD card slot 10. Bass control button (decrease) 11. BASS+ control button (increase) 12. AUX input (3.5mm) 13. LED display screen 14. ON/OFF power button 15. Vol+ control button (increase) 16. Vol control button (decrease) 17.
LED Display Screen The LED display screen displays status information such as mode, FM radio frequency, etc. When the battery needs to be charged (usually less 10% of the total power), it displays “BITTY. If a USB drive or SD card is inserted, but has no MP3 music files loaded, it will display “NO”. USB and SD mode 1. Insert a SD card or USB flash drive with MP3 music files into the SD slot or USB port, audio playback will begin automatically. 2. Press the aor button once to select songs.
FM Radio 1.In FM mode, press and hold the »1 PLAY/PAUSE button to initiate auto scan for available FM radio stations and store them into memory. LED screen will display "CH01”, “"CH02”, etc. 2. Press the e« or i button to change between preset stations. 3.To manually change the radio frequency, press the i PLAY/PAUSE button once. The LED display will flash, then you can proceed to manually change the radio frequency by pressing the k< or »i buttons (frequency changes by 0.2MHz increment or decrement). 4.
How to use the Equalizer Press the EQ button to toggle between equalizer profiles. The toggle order is CLASSICAL. Note: The Equalizer (EQ) works only in USB and SD mode. How to charge the battery 1. Plug the mini USB end of the USB charging cable into the DC 5V charging port, and plug the USB end into any 5V DC output USB port (in-wall or in-car USB charger, PC, laptop, etc.) to charge the C SF-D45B unit. 2. The charging indicator LED light will be RED when charging is in process. 3.
3-MONTHS LIMITED WARRANTY Model of product: C SF-D45B This warranty is provided to you by Sondheim, and it is applicable to this Sondheim product with the following exceptions: « If the product was used for purposes different to the ones it is Intended. «If the product was operated not following the manual operation instructions. «If the product has been altered or repaired by people not authorized by the manufacturer, importer and/or retailer.
Caractéristiques 1. Haut-parleurs caisson de basse hi-fi passifs, sortie de son impeccable, basses supers et effets sonores dynamiques 2. Bluetooth 3.0, transfert de musique sans fils depuis tout appareil compatible Bluetooth avec technologie ADP (Profil de Distribution Audio Avancée) 3. Amplitude de Bluetooth 30 pieds/10 métrés 4, Fréquence complété radio FM 5. Entrée AUX pour connecter tout appareil audio 6. Afficheur DEL 7. Compatible avec clé USB 2 mémoire flash ou cartes mémoire SD jusqu'a 32 GB 8.
Emplacement des contrées O\RZ;‘ W o LD 1. Port de chargement de batterie mini USB Touche de rebobinage/arriére 3. Pl Touche Play/Pause 4. PPl Touche d'avance rapide/suivant 5.Touche MODE 6. Touche EQ égaliseur 7.Touche Bluetooth 3% 8.Témoin de charge DEL 9. Fente carte mémoire SD 10. Touche de contrôle de BASSES(diminution) 11. Touche de contrôle de BASSES+ (augmentation) 12. Entrée AUX (3,5mm) 13. Afficheur DEL 14. Interrupteur ON/OFF 15. Touche de contrée de Volume+ (augmentation) 16.
Afficheur DEL L'afficheur DEL montre de I'information d’état tel le mode, fréquence radio FM, etc. Lorsqu'il est nécessaire de charger la batterie {généralement moins puissance totale), il montrera les lettres “BETTY. Si une ¢lé USB ou une carte mémoire SD est insérée, pals quelle n'a pas de fichiers de musique MP3 chargés, Il montrera le mot “NO" Mode USB et SD 1. Insérez une carte mémoire 5D ou une clé USB avec des fichiers de musique MP3 dans la fente SD ou dans le port USB.
RADIO FM 1. Dans le mode FM, appuyez et maintenez la pression sur la touche PLAY/PAUSE afin d'initier la fonction de recherche de stations radio FM disponibles et de les sauvegarder dans la mémoire. Afficheur DEL montrera "CHOU% "CH02”, etc. 2. Appuyez sur la touche ou afin de changer entre les stations préréglées. 3. Afin de changer la fréquence radio manuellement, appuyez une fois sur la touche PLAY/PAUSE.
Comment charger la batterie 1. Branchez le bout mini USB du clébe chargeur USB dans le port de chargement CC 5V, et branchez le bout de I'USB dans n’importe quel port USB de sortie 5V CC {chargeur USB de mur ou auto, PC, ordinateur portable, etc)) afin de charger l'unité CSF-D45B. 2, La lumière témoin de charge DEL sera ROUGE lorsque le chargement est en cours. 3. Il prendra environ 3 heures afin de charger la batterie complètement.
GARANTIE LIMITÉE DE 3 MOIS Modelé du produit: CSF-D45B Cette garantie vous est fournie par Sonde, et elle couvre ce produit Sonde sous réserve des exceptions suivantes: « Quand le produit a été utilisé a d’autres fins que ceux pour lesquels il a été congru. « Si le produit a été mis en fonctionnement sans suivre les consignes d'utilisation comprises dans le manuel. «Aile produit a été altéré ou réparé par des personnes non autorisées par le fabricant, I'importateur et/ou le détaillant.