User Manual
Table Of Contents
- Overview
- Model Matrix
- Contents in Box
- Accessories (not included)
- Features
- Common Features, All Models
- Adjustable Volume Control
- Automatic Loud Noise Suppression
- Convertible Headband
- Color Ruggedizers
- Extreme Environmental Design
- Flexible Charging
- Hearing Protection
- In Headset Charging
- Light Weight
- Listen Thru Situational Awareness
- Long Battery Life
- Multilingual Voice Prompts
- Multimode Auto Shutdown
- Noise Dosimeter
- Two Stage Low Battery Alert
- USB Programmable
- User Replaceable Battery
- Voice Prompts
- Wired Line-in
- Common Features, Communication Headsets
- Wireless Bluetooth® Technology
- Wireless DECT Communications
- Common Features, All Models
- Configuring the Headset
- Fitting
- Charging
- Battery Replacement
- LED Indications
- Settings & Operation
- Care and Maintenance
- Troubleshooting
- Glossary
- Specifications
- Important Safety Information
- Sonetics Standard Limited Warranty
6 | Page
Behind Head Headstrap Installation
Tools Required: None
1. Insert the strap at dome opening.
2. Affix the strap using the hook and loop.
Replacing the Ruggedizer
1. Remove the headband
2. Peel back the ruggedizer
3. Replace the ruggedizer. Note the left and right.
Connecting a Two-way Radio
Tools Required: Scissors
1. Remove the left dome ruggedizer.
(with the microphone boom attached)
2. Cut the along the groove on the underside of the ruggedizer.
3. Replace the ruggedizer.
4. Open the Radio Cover and plug in the Sonetics PR Radio Adaptor.
5. Screw the adaptor into place.
6. Connect the Sonetics PR Radio Adaptor to the Radio.