User's Manual

5
Pairing and Operation
Before the Wireless PTT will work, it is required to pair it with the RSM.
It is recommended that only one accessory is paired at a time and that pairing is not
done within the vicinity of others carrying out a similar operation.
• Ensure that the Wireless PTT Interface is fully charged prior to use.
• Connect a headset to the RSM, and this to the radio. The radio should be
powered OFF.
• Press and hold the Wireless PTT button. The LED will illuminate RED.
• Switch on the radio. After a few moments the LED will rapidly flash. Release the
PTT to pair the devices. The LED will flash 3 times to confirm the pairing.
The LED will pulse during operation to indicate the wireless connection.