4235 020 00141 16-12-2002 13:28 Page 1 (Black/Process Black plate)
4235 020 00141 16-12-2002 13:29 Page 2 (Black/Process Black plate) A B C D E F G
4235 020 00141 16-12-2002 13:29 Page 3 (Black/Process Black plate) 3 General description A B C D E F G Brush head Color code Removable nut Power on/off button Sonic power handle Charger base with cord wrap Power cord ◗ Refer to bottom of charger for voltage specifications. IMPORTANT SAFEGUARDS READ ALL INSTRUCTIONS BEFORE USING SAVE THESE INSTRUCTIONS Sonicare\ has been carefully engineered for both effectiveness and safety.
235 020 00141 16-12-2002 13:29 Page 4 (Black/Process Black plate) 4 MEDICAL WARNINGS 1) Avoid using a brush head with crushed or bent bristles. Damaged bristles may break off while brushing. In order to prevent this, replace the brush head with a new one every 6 months or sooner if signs of wear appear. 2) Similar to starting with any new manual or electric oral hygiene product, consult your dental professional before using this product if you have had oral or gum surgery in the previous 2 months.
4235 020 00141 16-12-2002 13:29 Page 5 (Black/Process Black plate) 5 Preparing for use Attaching the brush head 1 C 1 Align the bar on the brush head with the notch on the handle and slide the brush head onto the handle. C 2 Screw the brush head nut clockwise until it's firmly tightened. If the brush head rattles when in use, tighten the nut further. 3 Remove the travel cap from your brush head.
4235 020 00141 16-12-2002 13:29 Page 6 (Black/Process Black plate) 6 Using the appliance Useful tips ◗ Gel toothpastes are recommended for optimal product performance. ◗ Place the brush head in your mouth before turning on your Sonicare and keep your mouth closed during brushing, otherwise toothpaste may splatter. ◗ You may experience a slight tickling or tingling sensation when using an electronic toothbrush such as Sonicare for the first time.
4235 020 00141 16-12-2002 13:29 Page 7 (Black/Process Black plate) 7 Brushing technique Follow these simple steps to maximize your brushing experience. C C 1 1 Before turning the Sonicare on, place the bristles of the brush head along the gumline with the longer bristles placed between your teeth. 2 Position the bristles of the brush head towards the gumline and close your mouth. 3 Hold the handle with a light grip and turn the Sonicare on.
4235 020 00141 16-12-2002 13:29 Page 8 (Black/Process Black plate) 8 power (after the 12th brushing), you will no longer hear the double beep at the beginning of your brushing routine. ◗ Note: each of the first 12 brushings must be at least 1 minute in length to properly move through the Easy-start ramp-up cycle. To turn off or reactivate the Easy-start feature: 1 Attach your brush head to the handle. 2 Place the handle in a plugged-in charger base.
4235 020 00141 16-12-2002 13:29 Page 9 (Black/Process Black plate) 9 C 1 Place the handle in the charger base (with the Sonicare logo facing towards you) to begin the recharging process. ◗ The power button light flashes slowly when the handle is in the charger base to signal charging is in progress. ◗ When the Sonicare is fully charged, the power button light is constantly on (not flashing), signalling that your Sonicare is ready for use.
4235 020 00141 16-12-2002 13:29 Page 10 (Black/Process Black plate) 10 Replacement Brush head Sonicare brush heads should be replaced every 6 months to achieve optimal results. Use only Sonicare Advance Series replacement brush heads. Environment HANDLE CONTAINS NICKEL CADMIUM BATTERIES. BATTERIES MUST BE RECYCLED OR DISPOSED OF PROPERLY. The batteries inside your Sonicare cannot be replaced, but are easily removed for recycling.
4235 020 00141 16-12-2002 13:29 Page 11 (Black/Process Black plate) 11 C 4 Turn the screwdriver handle sideways, using twisting and prying motions, to crack open the handle along its side seams. C 5 Pull the 2 handle sections completely apart. C 6 Insert the screwdriver underneath the electronic circuit board in multiple places. C 7 Twist and pry the electronic circuit board loose until it is completely separated from the handle.
4235 020 00141 16-12-2002 13:29 Page 12 (Black/Process Black plate) 12 C 9 Use a twisting and prying motion to break the glue bond on the inside of the handle plastic and underneath the batteries. The 2 batteries are joined together with glue and will be lifted out together. For information about Sonicare's battery recycling program or instructions on recycling your Sonicare, call 1-800-682-7664 (North America) or, outside North America, contact your local Philips Customer Care Center.
4235 020 00141 16-12-2002 13:29 Page 13 (Black/Process Black plate) 13 Troubleshooting If you are unable to solve your problem by means of the troubleshooting guide below, please contact our Customer Service Center at 1-800-682-7664(in North America), or the Philips Customer Care Center in your country. Problem Solution The Sonicare toothbrush does not work Recharge your Sonicare overnight, ensuring that it is not plugged into an electrical outlet controlled by a light switch.
4235 020 00141 14 16-12-2002 13:29 Page 14 (Black/Process Black plate)
4235 020 00141 16-12-2002 13:29 Page 15 (Black/Process Black plate) 15
4235 020 00141 16-12-2002 13:30 Philips Oral Healthcare, Inc. 35301 SE Center Street Snoqualmie,WA 98065 USA www.sonicare.com 1-800-682-7664 (North America only) Printed in USA on 100% recycled paper Protected by U.S. and international patents. Other patents pending. © 2002 Philips Oral Healthcare, Inc. All rights reserved. PHILIPS and Philips shield are registered trademarks of Koninklijke Philips Electronics NV.