User's Manual

B
The Smartimer will automatically reset to the beginning of a 2-minute
cycle if:
- you stop brushing for 30 seconds or longer;
- you put the handle in the charger.
Quadpacer\
C
◗ The Quadpacer 30-second interval timer ensures that you brush
all sections of your mouth evenly and thoroughly.At 30, 60 and
90 seconds, you will hear a short beep and a pause in brushing
action.This is your signal to start brushing the next section of
your mouth.
Programmable Quadpacer (specific types only)
The Programmable Quadpacer offers you the option of customising
the Quadpacer in 1 of 3 ways:
◗ You may choose to keep the default setting of a 2-minute brushing
time with the Quadpacer activated.
◗ You may choose to extend the brushing time by 30 seconds to
2.5 minutes with the Quadpacer activated.
◗ You may choose a 2-minute brushing time with the Quadpacer
deactivated.
To change the Quadpacer setting:
1 Place the handle in the plugged-in charger.
C
2 Press the Dual Speed Control button briefly and note which
LED lights up.
3 Press and hold the Dual Speed Control button. Continue to
hold the button while the LEDs slowly cycle through the
Quadpacer settings:
C
◗ The fourth LED burns green: the 2-minute Quadpacer is active
(default setting).
ENGLISH 9
1
2
4
3