Operation Manual

3 Press and hold the power button for 5 seconds.You will hear

1 beep if the Easy-start feature is off. If you hear 2 beeps,

Easy-start is active (on).

Using the Easy-start feature beyond the initial ramp-up period is not

recommended and reduces Sonicare's effectiveness in removing

plaque.

The Easy-start feature should be deactivated when Sonicare is used in

clinical trials.

Smartimer\ 2-minute timer

◗ All Sonicare models come with the Smartimer feature, which

automatically sets the brushing time to the 2 minutes

recommended by dental professionals.

◗ If you wish to pause or stop brushing during your 2-minute cycle,

press the power button. Press the power button again and the

Smartimer will pick up where you left off.

◗ The Smartimer will automatically reset to the beginning of a

2-minute cycle if:

- brushing is paused for 30 seconds or longer;

- the handle is returned to the charger base.

Quadpacer\ 30-second interval timer (available on select

models).

◗ Quadpacer makes sure that you brush all sections of your mouth

evenly and thoroughly.At 30, 60 and 90 seconds, you will hear a

short beep and a pause in brushing action.This is your signal to

move to the next section of your mouth.

Recharge indicator battery charge status (available on

select models).

◗ If your Sonicare has a low charge, you will hear 5 beeps after you

have brushed your teeth for 2 minutes and the power button light

will flash rapidly.

When you hear the low charge indication, you have 3 or fewer

2-minute brushings left.

1 Place the handle in the charger base (with the Sonicare logo

facing towards you) to begin the recharging process.

◗ The power button light flashes slowly when the handle is in the

charger base to signal charging is in progress.

ENGLISH 9