Operation Manual

in each section progressing through all 4 sections untill you’ve
brushed for 2 minutes
7 After the 2-minute brushing cycle is complete, additional time
should be spent brushing the chewing surfaces of your teeth.
Press the power button to turn the brush on and off as needed.
To clean your mouth more completely, you may also brush your
tongue, with the toothbrush turned on or off, as you prefer.
Remember to floss daily.
Features
Easy-start\ brushing power ramp-up
◗ All Sonicare models come with the Easy-start feature activated
(on), which helps you get used to brushing with Sonicare.
◗ Brushing power will gently increase to full power over the first
12 brushings.
◗ The Easy-start feature is active if you hear 2 beeps immediately
after turning on your Sonicare. Once you reach optimal brushing
power (after the 12th brushing), you will no longer hear the
double beep at the beginning of your brushing routine.
◗ Note: each of the first 12 brushings must be at least 1 minute in
length to properly move through the Easy-start ramp-up cycle.
To turn off or reactivate the Easy-start feature:
1 Attach your brush head to the handle.
2 Place the handle in a plugged-in charger base.
3 Press and hold the power button for 5 seconds.You will hear
1 beep if the Easy-start feature is off. If you hear 2 beeps, Easy-
start is active (on).
Using the Easy-start feature beyond the initial ramp-up period is not
recommended and reduces Sonicare's effectiveness in removing
plaque.
The Easy-start feature should be deactivated when Sonicare is used in
clinical trials.
Smartimer\ 2-minute timer
◗ All Sonicare models come with the Smartimer feature, which
automatically sets the brushing time to the 2 minutes
recommended by dental professionals.
◗ If you wish to pause or stop brushing during your 2-minute cycle,
press the power button. Press the power button again and the
Smartimer will pick up where you left off.
ENGLISH8