Quick Start Guide

Last Update: 1/4/21

Applications Manual for Sound Recording with iOS

6b. ShurePlus™ Motiv Audio

Audio Recording App – sampling frequency 44.1/48kHz, 16 or 24-bit output file size

www.shure.com

ShurePlus™ Motiv is a clear, straight forward App for recording stereo audio. The main screen has the basic transport

controls, a simple waveform display of the audio track and easy to read level meters. There is a clear indication at the top

of the screen whether the source is External Mic (Sonic VR15 USB-C) or Built-in Mic. When the input is External Mic the

meter will show the left channel (top bar) and right channel (bottom bar). Located below the meters is the MIC GAIN. If

you don’t see this slider control, then do this:

IMPORTANT:

FIRST: plug the USB Camera Adaptor Cable into your iOS device.

SECOND: plug the SP15 into the Camera Adaptor Cable.

THIRD: launch the App. Following this procedure will ensure your device recognizes the SP15.

The MIC GAIN should be set to 50% when the App starts up. That’s the nominal setting for the SP15 so when the meter

registers the top red led, the level is 120dB SPL. Located just below the waveform display on the right is the sampling rate

selector. It toggles between 16 and 24-bits and 44.1 and 48kHz. The recording file format is .wav. There is a utility for

converting the .wav file to .aac after the recording is finished. Operation of this App is very simple: You push the red