User Manual

SonicWALL TZ 150 Wireless Getting Started Guide Page 11
3. Change Time Zone - Change the Time Zone setting to your
local time zone.
Click Next.
!
Note: It is important that you set the time zone correctly before
you register your SonicWALL TZ 150 Wireless.
4. WAN Network Mode - The Setup Wizard automatically detects
most networking modes. If it does not detect the networking
mode, you may have a Static IP Address. See Procedure 1,
“Collect Required Information” on page 3.
Confirm the selection or select the correct type of network
connection for your network.
Click on the yellow link for a networking type to see a definition.
Click Next.
Time Zone Select the time zone for your location from the list.
Automatically
adjust clock
for daylight
saving time
Check this if you live in an area that observes Day-
light Savings Time.
Static IP Select Static IP if you want to give the
SonicWALL TZ 150 Wireless a specific, unchanging
IP address.
DHCP Select DHCP if your ISP assigns your computer a
dynamic IP Address. DHCP is commonly used with
cable modems.
PPPoE Select PPPoE if your ISP requires a username and
password to establish a connection and assign a
dynamic address. PPPoE is commonly used with
DSL modems.
PPTP Select PPTP if you dial into a specific server and log
into a VPN to establish a connection. With PPTP,
you can have either a static or dynamic IP Address.