User Manual
Table Of Contents
- SonicWALL TZ 150 Wireless Security Appliance Getting Started Guide
- Before You Begin
- SonicWALL TZ 150 Wireless Configuration
- Collect Required Information
- Applying Power to the SonicWALL TZ 150 Wireless
- Connecting the SonicWALL TZ 150 Wireless
- Accessing the Management Interface
- Using the SonicWALL Setup Wizard
- Registering Your SonicWALL TZ 150 Wireless
- Activating SonicWALL Security Services
- Connecting Wireless Clients to the SonicWALL TZ 150 Wireless
- Connecting Computers to Your SonicWALL TZ 150 Wireless
- Configuring DHCP IP Addressing
- Wall Mounting the SonicWALL TZ 150 Wireless
- SonicWALL TZ 150 Wireless Security Appliance Regulatory Statement and Safety Instructions
- Glossary of Networking Terms
- Notes
- Notes
Page 12
5. WAN Network Mode - The second WAN network mode page
configures your WAN settings for the selection you made in the
previous page.
WAN Network Mode: NAT Enabled (Static IP)
Click Next.
WAN Network Mode: NAT with DHCP Client
You do not need to enter any WAN networking settings. The
network settings are provisioned automatically from a DHCP
server.
Click Next.
SonicWALL
WAN IP
Address
Enter a single, static IP address. This must be in
the correct address range for your ISP.
WAN Sub-
net Mask
Enter the subnet mask for your network, for
example, 255.255.255.0.
Gateway
(Router)
Address
Enter the IP address of your internet gateway.
DNS Server
Address
Enter the IP address of the DNS server for your
network.
DNS Server
Address #2
(optional)
You can enter a secondary, back-up DNS server
to use if the first one fails.