User Manual
Table Of Contents
- SonicWALL TZ 150 Wireless Security Appliance Getting Started Guide
- Before You Begin
- SonicWALL TZ 150 Wireless Configuration
- Collect Required Information
- Applying Power to the SonicWALL TZ 150 Wireless
- Connecting the SonicWALL TZ 150 Wireless
- Accessing the Management Interface
- Using the SonicWALL Setup Wizard
- Registering Your SonicWALL TZ 150 Wireless
- Activating SonicWALL Security Services
- Connecting Wireless Clients to the SonicWALL TZ 150 Wireless
- Connecting Computers to Your SonicWALL TZ 150 Wireless
- Configuring DHCP IP Addressing
- Wall Mounting the SonicWALL TZ 150 Wireless
- SonicWALL TZ 150 Wireless Security Appliance Regulatory Statement and Safety Instructions
- Glossary of Networking Terms
- Notes
- Notes
SonicWALL TZ 150 Wireless Getting Started Guide Page 15
6. LAN Settings - The LAN Settings page configures your LAN
interface. These settings apply to all twenty-four LAN ports.
By default, your SonicWALL TZ 150 Wireless is configured with a
LAN network IP address, 192.168.168.168, and subnet mask,
255.255.255.0, that will work well for most installations. In most
cases, leave the default LAN IP address and subnet mask
unchanged.
!
Note: The LAN IP address is the address you will use to access
the SonicWALL TZ 150 Wireless management interface.
Click Next.
SonicWALL
LAN
IP Address
Accept the default IP address or enter a new IP
address of the LAN interface.
LAN
Subnet Mask
Accept the default, or enter a subnet mask for your
LAN.
Enable
Windows
Networking
Support
Leave this option checked if you plan to have more
than one Windows computer, Windows Networking
allows them to communicate with each other. If you
have only one Windows computer or have comput-
ers with other operating systems, Windows Net-
working has no effect.