User Manual

Page 16
7. LAN DHCP Settings - The LAN DHCP Settings page allows you
to select whether or not to use the DHCP Server in the
SonicWALL TZ 150 Wireless to automatically distribute IP
addressing information to computers and other network devices
on your LAN.
Click Next.
8. WLAN 802.11b/g Settings - The WLAN 802.11b/g Settings page
allows you to configure your wireless network settings.
Click Next.
Enable
DHCP
Server on
LAN
Leave checkbox checked to use the DHCP server in
the SonicWALL TZ 150 Wireless.
Do not use select this option if you already have a
DHCP server on your network, or if you want to require
your network clients to have static IP addresses.
LAN
Address
Range
If you enabled the DHCP Server, enter a range of IP
addresses in the same subnet as the LAN IP address.
Leave the default range unchanged if you accepted the
default LAN IP address and subnet mask settings in
the previous page.
SSID Enter a unique name your wireless clients will use to
identify the SonicWALL TZ 150 Wireless connection.
Radio
Mode
Select which radio transmission standard you want to
use. The default, Mixed, works for most office and
home settings.
Country
Code
Select the country where you are deploying this
SonicWALL TZ 150 Wireless
Channel Select the broadcast channel you want the
SonicWALL TZ 150 Wireless to use. The default,
AutoChannel automatically detects the channel with
the least interference to use.