User Manual
Table Of Contents
- SonicWALL TZ 150 Wireless Security Appliance Getting Started Guide
- Before You Begin
- SonicWALL TZ 150 Wireless Configuration
- Collect Required Information
- Applying Power to the SonicWALL TZ 150 Wireless
- Connecting the SonicWALL TZ 150 Wireless
- Accessing the Management Interface
- Using the SonicWALL Setup Wizard
- Registering Your SonicWALL TZ 150 Wireless
- Activating SonicWALL Security Services
- Connecting Wireless Clients to the SonicWALL TZ 150 Wireless
- Connecting Computers to Your SonicWALL TZ 150 Wireless
- Configuring DHCP IP Addressing
- Wall Mounting the SonicWALL TZ 150 Wireless
- SonicWALL TZ 150 Wireless Security Appliance Regulatory Statement and Safety Instructions
- Glossary of Networking Terms
- Notes
- Notes
Page 4
Other Information
SonicWALL Management Interface
To access the SonicWALL TZ 150 Wireless Web-based
management interface. These are the default settings, which you
can change:
User Name:
admin
Password: password
Applying Power to the
SonicWALLTZ 150 Wireless
1. Plug the power supply into back of the security appliance and
into an appropriate power outlet.
The Power LED on the front panel lights up green when you
plug in the SonicWALL TZ 150 Wireless. The Test LED may
light up and may blink while the appliance performs a series of
diagnostic tests. When the Test light is no longer lit, the security
appliance is ready for configuration.
If the Test LED remains lit after the SonicWALL TZ 150 Wireless
has booted, Restart the security appliance.
For more trouble shooting information, refer to the SonicOS
Standard Administrator’s Guide available on the SonicWALL
Resource CD and on the Web at:
<http://www.sonicwall.com/us/support.html>
2