User's Manual

Table Of Contents

SonicWALL SonicPoint Getting Started Guide Page 27

Mounting Using Anchor Screws

To mount the SonicPoint using included anchor screws:

1. On the mounting surface, mark the location to make two

screw holes. The marks should be horizontally parallel to

each other.

2. Drill the holes to accommodate the metal anchor screws.

3. Screw the anchor screws into the holes to their full depth.

4. Insert the 5/8” screws into the anchors, and screw them in

deep enough to leave minimal space between the screw

heads and the wall surface.

5. (Optional) Attach the front LED/logo cover plate to the top

of the SonicPoint and if necessary, rotate it to the desired

position.

6. Supporting the SonicPoint in your hands, securely fit the

underside slots of the SonicPoint onto the screw heads.

See also, Product Safety and Regulatory Information - page 37

link

wlan

lan

act

link

act