Users Manual

ManualsBrandsSONICWALL ManualsNetwork HardwareWireless Network Security Appliance

•

SonicWall

SonicWave 231c

Safety and Regulatory Information

TZ270W, TZ370, TZ470W Safety and

Regulatory

Reference Guide

Regulatory Model Number:

APL47-101 (TZ270W, TZ370W)

APL57-0F2 (TZ470W)

This document contains safety and regulatory information for the SonicWall TZ270W, TZ370W,

TZ470W. The TZ270W, TZ370W, TZ470W are wireless network security appliances with an

internal wireless radio that can provide wireless access on either 5GHz or 2.4GHz and supports

the 802.11 ac/n/g/a/b standards.

Topics:

Summary of content (17 pages)

PAGE 1
TZ270W, TZ370, TZ470W Safety and Regulatory Reference Guide Regulatory Model Number: APL47-101 (TZ270W, TZ370W) APL57-0F2 (TZ470W) This document contains safety and regulatory information for the SonicWall TZ270W, TZ370W, TZ470W. The TZ270W, TZ370W, TZ470W are wireless network security appliances with an internal wireless radio that can provide wireless access on either 5GHz or 2.4GHz and supports the 802.11 ac/n/g/a/b standards.
PAGE 2
Safety Information for Installation and Operation • Installation Requirements • RF Safety Distance • Cable Connections • Power Supply Information • Restricted Environments • Radio Approvals • Radio or Television Interference • Wireless Interoperability NOTE: Additional regulatory notifications and information for this product can be found online at: https://www.sonicwall.com/support/technical‐documentation TZ270W, TZ370W, TZ470W complies with FCC U‐NII New Rules.
PAGE 3
1 2 3 4 5 6 7 8 9 Mount in a location away from direct sunlight and sources of heat. A maximum ambient temperature of 104º F (40º C) is recommended. Route cables away from power lines, fluorescent lighting fixtures, and sources of noise such as radios, transmitters, and broadband amplifiers. The included power cord(s) are approved for use only in specific countries or regions. Before using a power cord, verify that it is rated and approved for use in your location.
PAGE 4
Restricted Environments The SonicWall wireless device, like other radio devices, emits radio frequency electromagnetic energy. The SonicWall wireless device operates within the guidelines found in radio frequency safety and recommendations. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.
PAGE 5
is not responsible for any radio or television interference caused by unauthorized modification of the devices included with this SonicWall Wireless device kit, or the substitution or attachment of connecting cables and equipment other than that specified by SonicWall Inc. The correction of interference caused by such unauthorized modification, substitution or attachment is the responsibility of the user. SonicWall Inc.
PAGE 6
The following information is provided on the device or devices covered in this document in compliance with FCC regulations: • Product name: • SonicWall Z270W • SonicWall Z370W • SonicWall Z470W • Company name: Regulatory Model APL57-101 APL57-101 APL57-0F2 SonicWall Inc. is the responsible party for this product. For an EMC compliance issue or a regulatory inquiry, please use the following contact information: SonicWall Inc.
PAGE 7
United States of America Authorized Channels SonicWall declares that the APL57-0F2, APL57-101 (FCC ID: 2AKCZ-101) when sold in the USA is limited to CH1‐CH11 by specified firmware controlled in the USA. CAUTION: This device is restricted to indoor use due to its operation in the 5.15GHz to 5.25GHz frequency range. The FCC requires this product to be used indoors for the frequency range 5.15GHz to 5.25GHz to reduce the potential for harmful interference to co‐channel Mobile Satellite systems.
PAGE 8
Consignes de sécurité pour l'installation et l'utilisation • • • Exigences relatives à l'installation Raccordements Informations sur l’alimentation électrique Exigences relatives à l'installation AVERTISSEMENT: Les conditions suivantes sont requises pour une installation correcte: 1 Procédez au montage dans un endroit à l'abri des rayons du soleil et des sources de chaleur. Une température ambiante maximale de 40 °C (104 °F) est recommandée.
PAGE 9
Tous les câbles Ethernet et RS232 (console) sont conçus pour la connexion à d'autres appareils à l'intérieur d'un même bâtiment. Ne reliez pas ces ports directement à des câbles de communication ou à d'autres câbles qui sortent du bâtiment dans lequel se trouve l'appareil SonicWall. Avertissement Relatif à la Batterie au Lithium La batterie au lithium située à l'intérieur de l'appareil de sécurité SonicWall ne peut en aucun cas être remplacée par l'utilisateur.
PAGE 10
This device has been certified for use in Canada. Status of the listing in the Industry Canada’s REL (Radio Equipment List) can be found at the following web address: http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch.do?lang=eng. Additional Canadian information on RF exposure also can be found at the following web address: http://www.ic.gc.ca/eic/site/smt‐gst.nsf/eng/sf08792.html.
PAGE 11
Déclaration de l'exposition aux radiations Cet équipement est conforme à l'exposition aux rayonnements IC limites établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre le radiateur et votre corps. Cet appareil est homologué pour l'utilisation au Canada. Pour consulter l'entrée correspondant à l'appareil dans la liste d'équipement radio (REL ‐ Radio Equipment List) d'Industry Canada, rendez‐vous sur: http://www.ic.gc.
PAGE 12
安全須知與規範資訊規格型號型号型号警告 1 避免架設於陽光直射處和熱源所在位置。建議的最高環境溫度為 104º F (40º C)。 2 接線路徑請避開電線、日光燈具及雜訊來源，像是無線電、發射器和寬頻強波器 3 随附的电源线经过核准，仅可用于特定的国家或地区。使用电源线前，请确认电源线的额定值且经过核准可用于您所在的地点。 4 確認不會有水或大量濕氣進入裝置。 5 裝置周圍的通風與流過裝置旁風扇的氣流不應受阻。建議的至少應相隔 1 吋 (25.
PAGE 13
鋰電池警告 SonicWall 安全設備中所使用的鋰電池不可由使用者自行更換。SonicWall 安全設備必須送回 SonicWall 授權的服務中心更換同款或製造商建議的同等類型鋰電池。如因故必須處置電池或 SonicWall 安全設備，請遵循電池製造商的指示進行。電源供應器資訊若您的 SonicWall 產品包裝內缺少電源供應器，請聯絡 SonicWall 技術支援 ttps://www.sonicwall.com/support/contact-support 進行更換。本產品僅可使用 UL 所列標有「I.T.E.LPS」的電源供應器，其額定輸出電壓為 12V DC，最小 3.
PAGE 14
配件 (Accessories) － ○ ○ ○ ○ ○ 備註 1.〝○〞係指該項限用物質之百分比含量未超出百分比含量基準值。備註 2.〝－〞係指該項限用物質為排除項目。附註：有關本產品的其他法規須知與資訊可於下方網站線上取得： https://www.sonicwall.
PAGE 15
• 改變電腦相對於接收器的位置。 • 將電腦移離接收器。 • 將電腦插在不同的插座，使電腦與接收器位於兩個不同的分支電路上。如有必要，請洽詢 SonicWall 支援代表，或熟練的廣電技術人員或 EMC 技術人員，以便獲得其他建議。資訊技術設備(ITE)，包括週邊裝置、擴充卡、印表機、輸入/輸出裝置、顯示器等，這些整合或連接到系統上的裝置應該與電腦系統的電磁環境類別匹配。關於屏蔽訊號纜線的甲類通告: 僅使用屏蔽訊號來連接周邊裝置至任何 SonicWall™ 裝置已減少廣電通訊服務可能的干擾。使用屏蔽纜線能確保維持適當的預設環境電磁相容分類。使用屏蔽纜線能確保維持適當的預設環境電磁相容分類。對於並列印表機， SonicWall™ 供一條可用纜線。如果您想要，您可以從 SonicWall™ 全球網站 www.sonicwall.
PAGE 16
使用此產品時應避免影響附近雷達系統之操作。高增益指向性天線只得應用於固定式點對點系統。電磁波曝露量 MPE 標準值 1mW/cm2，送測產品實測值為 0.
PAGE 17
低功率電波輻射性電機管理辦法第十二條經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。第十四條低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。使用此產品時應避免影響附近雷達系統之操作。高增益指向性天線只得應用於固定式點對點系統。電磁波曝露量 MPE 標準值 1mW/cm2，送測產品實測值為 0.