AVN-DIO14 Dante® to XLR Analogue Stereo Input & Output Handbook Manufacturers of Audio Products for AV, Installed Sound, Broadcast Radio & Broadcast TV
AVN-DIO14 Handbook Registration & Warranty For the latest Sonifex handbook information please visit the Sonifex website at www.sonifex.co.uk This handbook is for use with the following products: AVN-DIO14 Dante® to XLR Analogue Stereo Input & Output Artwork: AW11067 Stock Code: 30-392 © Sonifex Ltd, 2022 All Rights Reserved Revision 1.00, August 2022 Sonifex Ltd, 61, Station Road, Irthlingborough, Northants, NN9 5QE, England. Tel: +44 (0)1933 650 700 Fax: +44 (0)1933 650 726 Email: sales@sonifex.co.
AVN-DIO14 Handbook d. e. f. g. h. Subject to condi�ons (a) and (c) from the �me of despatch of the Goods from the Company’s premises the Purchaser shall be responsible for any defect in the Goods or loss, damage, nuisance or interference whatsoever consequen�al economic or otherwise or wastage of material resul�ng from or caused by or to the Goods. In par�cular the Company shall not be liable for any loss of profits or other economic losses. The Company accordingly excludes all liability for the same.
AVN-DIO14 Handbook AVN-DIO14 Dante® to XLR Analogue Stereo Input & Output Setup Connect the device to a PoE enabled switch using an Ethernet cable, the device will automa�cally turn on. If the switch does not support PoE, a PoE injector can be used to provide power. By default the Dante IP address is obtained automa�cally, therefore the device will automa�cally appear in Dante Controller. If your device does not appear in Dante Controller please see the Network Troubleshoo�ng sec�on of this manual.
AVN-DIO14 Handbook Network Troubleshooting If the device does not show up in Dante Controller please check that the Ethernet cable is correctly connected and that the device and computer are on the same network. If the computer and the device are on different IP subnets, the device will appear in Dante Controller with red text: Fig 6: Red device name indicates network configuration error Opening the Device View for the device will provide details about the problem.
AVN-DIO14 Handbook Device View Open up the Device View by double clicking on the device name in the rou�ng grid. Status Within the Status tab, informa�on about the device can be seen, such as the product type and the current IP address. Fig 1-3: AVN-DIOBT Brackets & Belt Clip Fig 11: Status tab Device Configuration Within the Device Config tab the following can be modified.
AVN-DIO14 Handbook Technical Specification For AVN-DIO14 Analogue XLR Input / Output Pin-out Pin Func�on 1 Chassis Ground 2 Phase 3 Non Phase Line Inputs - XLR Input Impedance: 0dBFS Line-Up: Frequency Response: THD+N: Dynamic Range Cross Talk Common Mode Rejec�on Fig 1-7: AVN-DIO14 Iso View Shown with Deskbar A�ached Line Outputs - XLR Output Impedance: 0dBFS Line-Up: Frequency Response: THD+N: Dynamic Range Cross Talk Fig 1-8: AVN-DIO14 Front Iso View Shown without Accessories Network and AoIP AoIP S
AVN-DIO14 Handbook www.sonifex.co.uk t:+44 (0)1933 650 700 f:+44 (0)1933 650 726 sales@sonifex.co.
