Reference Monitors August 2008 www.sonifex.co.uk t: +44 (0)1933 650 700 f: +44 (0)1933 650 726 sales@sonifex.co.
Contents Below is a list of links to sections within this document. Click on the required subject to go to that section.
REFERENCE MONITORS Reference Monitors Reference Monitor Range of Rack-Mount Audio Monitors The three monitors in the range are: The Reference Monitor Range is a new series of rack-mount audio monitors, combining the latest DSP technology with outstanding audio enclosure design to produce monitors of the highest standards with exceptional sound quality, a comprehensive feature set and good looks in the rack.
REFERENCE MONITORS REFERENCE MONITORS Reference Monitors Each of the drivers is magnetically shielded so that the monitors are perfectly safe to use near CRTs and TFT displays and each speaker uses a separate, highly efficient class-D switching amplifier. Even cable lengths to and from the speaker enclosures have been kept short to reduce any potential microphonic induction. DSP Based Design The use of a modern electronic architecture allows a much better audio performance to be realised.
REFERENCE MONITORS Reference Monitors RM-2S4 RM-2S10 Reference Monitor, 2 LED Meters & 4 Stereo Channel Inputs Reference Monitor, 2 LED Meters & 10 Stereo Channel Inputs 5 Band Parametric Equalisation Each product in the Reference Monitor range contains an embedded 5 band parametric equaliser.
REFERENCE MONITORS REFERENCE MONITORS - RM-2S4 & RM-2S10 Reference Monitors RM-2S10 Front & Rear Views rotary encoder, with clear LED indication of the current selection. On the RM-2S10, the Source LEDs also act as signal present indicators. A pair of line-level audio outputs, configurable as analogue or AES/EBU digital, follow the selected source at either a fixed level or one mirroring the loudspeaker volume.
REFERENCE MONITORS Reference Monitors AES/EBU Sample Rate: Input Gain: Selection: 4 x stereo analogue or AES/ EBU digital (autoselecting) 10 x stereo analogue, plus 10 x stereo AES/EBU digital +18dBu (analogue)/0dBFS (digital) >60dB typical 20kohms (analogue) 110 ohms (digital with termination switchable) 32 to 192kHz, converted internally to 48kHz 0, +6, +12 or +18dB digital gain (switchable) Front panel rotary control with indicator LEDs Line Level Outputs Audio Outputs: 1 x stereo analogue or AES/EBU
REFERENCE MONITORS Reference Monitors Reference Monitor, 4 LED Meters, 8 Channel Inputs & Dual Source Selectors REFERENCE MONITORS - RM-4C8 RM-4C8 RM-4C8 Front & Rear Views With 4 x bright high-resolution 26 segment meter displays and separate left and right source selectors, the RM-4C8 is ideal for monitoring audio channels in an SDI group, or groups of de-embedded AES/EBU channels.
REFERENCE MONITORS Reference Monitors Technical Specification For RM-4C8 Inputs Audio Inputs AES/EBU Sample Rate: Input Gain: Selection: >60dB typical 20kohms (analogue) 110 ohms (digital with termination switchable) 32 to 192kHz, converted internally to 48kHz 0, +6, +12 or +18dB digital gain (switchable) 2 x Front panel rotary control with indicator LEDs Line Level Outputs Audio Outputs: 1 x stereo analogue or AES/EBU digital (switchable) Gain re Unity or variable, following volume Selected Input: c
REFERENCE MONITORS Reference Monitors REFERENCE MONITORS - RM-HD1 REFERENCE MONITOR HD-SDI EXPANSION CARD & RM-HDE1 REFERENCE MONITOR HD-SDI & DOLBY® E EXPANSION CARD RM-HD1 Reference Monitor HD-SDI Expansion Card & RM-HDE1 Reference Monitor HD-SDI & Dolby® E Expansion Card These expansion boards allow the monitoring of embedded audio channels within an SD/HD-SDI video signal.
www.sonifex.co.uk t:+44 (0)1933 650 700 f:+44 (0)1933 650 726 sales@sonifex.co.
