Handbook
Table Of Contents
- Warranty
- Safety Information
- Installation Information
- Confidence Monitors Introduction
- RM-CA2 Confidence Monitor, 2 LED Meters &
- 2 Analogue Stereo Inputs
- RM-CAD8 Confidence Monitor, 2 LED Meters, 2 Analogue &
- 6 Digital Stereo Inputs
- Technical Specification RM-CA2 & RM-CAD8
- Fig A: Packing List
- Fig B: Power Connections
- Fig C: Mains Lead Table
- Fig 1-1: RM-CA2 Confidence Monitor Front Panel
- 
- Fig 1-3: Confidence Monitor Block Diagram
- Fig 1-4: RM-CA2 Front Panel Controls
- Fig 1-5: RM-CAD8 Front Panel Controls
- Fig 1-6: RM-CA2 Source Selector Button Fig 1-7: RM-CAD8 Source Selector Button
- Fig 1-8: RM-CA2 & RM-CAD8 Meters & Phase Error LED
- Fig 1-11: RM-CA2 & RM-CAD8 Meters & Phase Error LED
- Fig 1-12: Confidence Monitor RM-CA2 Rear
- Fig 1-13: Confidence Monitor RM-CAD8 Rear
- Fig 1-14: DIPSwitch Settings
Condence Monitors User Handbook
11
TECHNICAL SPECIFICATION
RM-CA2 & RM-CAD8
4
TECHNICAL SPECIFICATION RM-CA2 & RM-CAD8
Technical Specification RM-CA2 & RM-CAD8
Inputs
Audio Inputs (RM-CA2): 2 x stereo analogue (1 x XLR balanced,
1 x XLR balanced or RCA phono unbal)
Audio Inputs (RM-CAD8): 2 x stereo analogue (1 x XLR balanced,
1 x XLR balanced or RCA phono unbal)
4 x stereo XLR balanced AES/EBU digital
1 x stereo RCA phono S/PDIF digital
1 x stereo optical TOSLink digital
Max Level (0dB Input Gain): +18dBu (analogue)/0dBFS (digital)
CMRR: >60dB typical
Analogue Input Impedances: XLR: >20kΩ balanced bridging
RCA: >10kΩ unbalanced
Digital Input Impedances: (RM-CAD8 only):
110Ω ±20% AES/EBU balanced I/O
75Ω ±5% S/PDIF unbalanced I/O
AES/EBU Sample Rate: 32 to 96kHz, converted internally to 48kHz
Input Gain: +10dB on unbalanced analogue input
Selection: Front panel push button with indicator LEDs
Line Level Outputs
Audio Outputs: 1 x stereo analogue
Gain re Selected Input: Unity or -10dB (switchable) & level control
from front panel
Maximum Output Level: +18dB
Output Impedance: <50 ohms
Distortion: <0.02% (1kHz, +8dBu output)
Noise: -95dB RMS, unity gain ref
+8dBu output
Frequency Response: 20Hz-20kHz +0/-0.5dB
Crosstalk Analogue I/O, ref 0dBu
1kHz input: <-90dB
10kHz input: <-85dB