User Guide

Getting Started 2
Inserting the Battery
11. Rotate both the battery cover screws in counter clockwise direction (as shown in the
figure). Use the screwdriver provided to open the screws. Sometimes, the battery cover
may be tight and extra effort is required to open it.
12. Lift the back cover to view the battery slot.
13. Insert the battery and push into the battery slot such that the three metallic contacts at
the top of the battery are aligned with the metallic contacts within the battery
compartment.
14. Close the battery cover. Rotate the battery cover screws in clockwise direction. You can
use the screwdriver provided to tighten the screws. Ensure not to over tighten the
screws.
Removing the Battery
1. Rotate both the battery cover screws in counter clockwise direction (as shown in the
figure). Use the screwdriver provided to open the screws. Sometimes, the battery cover
may be tight and some extra effort is required to open it.