User Guide

Managing Connectivity 61
Receiving Data via Bluetooth
To receive data using Bluetooth, your device should be Bluetooth activated and must be visible
to other devices.
1. When you receive a data, you are asked if you want to accept it.
2. Select Accept to receive data or select Reject to refuse the data.
3. If you accept, the data will be stored in Others.
Accessing Using USB Function
The phone can be used as a mass storage device, when it connected to the computer via a
USB cable and SD is inserted in the phone. The following two options are displayed:
Data storage: Select this to use the USB cable as mass storage device to transfer and
synchronize data between the Sonim XP STRIKE phone and your computer.
Modem mode: Select this to use the phone as a modem.
Note: The phone starts charging whenever the phone is connected to the computer, using USB
cable.
Note: Ensure that SD card is inserted in the phone, before connecting it to the computer. Else,
phone will display No memory card found message.