User's Manual

27
Managing Wireless and Network Settings
Connecting to Wi-Fi Network
Wi-Fi is a wireless network technology that can provide
Internet access at distance upto 100 feet, depending on
the Wi-Fi router and surroundings.
You can access Internet when you connect your XP7 to a
Wi-Fi network. To connect your phone to a Wi-Fi network,
1. From the Home or All app screen, tap on Settings
( ).
2. Enable Wi-Fi , located under Wireless & Networks
settings.
3. Tap on Wi-Fi. A list of Wi-Fi routers present within
your phone’s accessible range are displayed.
4. Tap on your preferred network. Enter the WEP/
WPS/ WPA key (if it is a secured network) and tap on
Connect. To verify the password before connecting,
enable Show password.
It is always recommended to make your Wi-Fi
router secure and also to connect your phone
to a secure network.
Adding a New Network
To add a new Wi-Fi network,
1. In the Wi-Fi settings screen, touch Add network
button ( ).
2. Enter the following details:
• Network SSID
• Security: Set the security type to None, WEP,
WPA/WPA2 PSK, 802.1x EAP.
3. Enable Advanced Settings to set the Proxy details
and IP settings.
Editing a Network
1. Tap and hold the connected network.
2. Select Modify Network. The network setting
details such as connection status, signal strength,
connection speed, security type, IP address and
password are displayed.
3. Tap on Save to Save the settings or Cancel to exit
to the previous screen.
Forgetting a Network
1. Tap and hold the connected network.
2. Select Forget Network.
The selected network gets disconnected from Wi-Fi
and prompts for password if it tries to get connected
again.
Enabling WPS For your Router
To setup a secure Wi-Fi network, press WPS Push button
( ) in the Wi-Fi network Settings and press the WPS
button in your router, when prompted.
Connecting to Bluetooth Devices
Bluetooth is a short-range wireless communication
technology used to communicate between the devices
over a distance of about 8 meters.
You can perform the following tasks using Bluetooth