User's Manual

43
• Setup: Enter your voicemail number.
• Sound: Set alert tone for voicemail message
• Vibrate: Enable this option to receive an
vibrating alert for voicemail messages.
Dial Pad Touch Tones
1. From the Home or All apps screen, tap Settings (
), and tap Sound.
2. Enable Dial pad touch tones located under System
Settings.
These tones control the keypad sound while dialing
a phone number.
Editing Quick Responses
The quick responses are the messages that can be used
instead of answering a call. (to reject a call).
1. From the Home or All apps screen, on Phone ( ),
tap Options > Settings.
2. Tap on Quick responses located under Other Call
settings.
3. Tap on Quick responses.
The list of quick responses are displayed.
4. Tap on the required quick responses from the list.
5. The same response is sent to the caller.
Monitoring Fixed Dial Numbers
FDN (xed dialing numbers) is a SIM card-enabled
feature. It restricts outgoing calls only to phone numbers
listed in the FDN list. This feature can be activated only
if PIN2 is entered. Contact your network operator if you
do not have a PIN2. Set up your phone to place outgoing
calls only to the xed dialing numbers (FDN) that you
save on the phone’s SIM card.
The device can be set to restrict outgoing calls only
to numbers with specied prexes. Those prexes are
stored in the SIM card.
1. From the Home or All apps screen, tap Phone (
), tap Options > Settings.
2. Tap on Fixed Dialing Numbers located under Other
Call Settings.
3. Tap on Enable FDN, and then enter the PIN2
supplied with the SIM card.
4. Change PIN2 allows you to change the PIN number
supplied with the SIM card.
5. Tap on FDN list and add numbers.
Monitoring Incoming and Outgoing Calls
Call screening options helps you to monitor and regulate
your incoming and outgoing calls.
Screening Incoming Calls
1. In the call settings screen, enable Screening
incoming calls to receive or reject calls from
unknown numbers.
2. To block incoming calls from certain numbers, tap
Screening incoming call setting and select one of
the following options:
• Allow only contacts: Allows calls only from
numbers stored in the contacts.
Managing Calls