User's Manual

7
Congratulations on the purchase of a Sonim XP3.20™
mobile phone. This phone is a GSM/GPRS/EDGE enabled
handset with tri-band capabilities and has an intuitive,
feature-rich user interface, which allows you to make the
best use of the offered functions.
Phone Models Covered
This user guide covers two Sonim XP3.20™ phone
models: XP3.20-E and XP3.20-A. These two models
contain an identical scope of features and differ only in the
supported set of radio frequencies:
• Sonim XP3.20-E Quest (GSM 900/1800/1900 MHz)
• Sonim XP3.20-A Quest (GSM 850/1800/1900 MHz)
The model name can be read on the phone label under
the battery. In this User Guide, both models are referred
to as XP3.20, except for the few places where information
corresponding to a specific model (that is, XP3.20-A or
XP3.20-E) can be found.
Network Services
These are additional services that you can avail through
your network service provider. To make the best of these
services, you must subscribe to them through your service
provider and obtain instructions for their use from your
service provider.
Sonim Support Information
For additional product and support information,
visit www.sonimtech.com.
Use the Guide Effectively
Acquaint yourself with the terminology and symbols used
in the guide to help you use your phone effectively.
PRESS Means to press and release a
key immediately. For example,
Press 2 means that you press
the key on the keypad that is
labelled with the numeral 2
and the alphabets “ABC”.
SELECT Means to either press the
Left or Right Selection Key to
apply the command indicated
at the bottom of the screen.
The Center navigation key
can also be used to select
options. For example, if this
guide says Select Menu
> Messages > Create
message, you must press the
Left Selection Key to select
Menu, scroll to Messages
and press the Left Selection
Key, scroll to Create message
and press the Left Selection
Key. To return to the previous
screen, press the Right
Selection Key.
General Information