User manual

44
Resend, Forward, Save detail, Mark text, and
Copy all.
The messages are saved in Sent, only if it
is activated in Menu > Messages. Refer
“Message Settings” on page 38.
Deleting Messages
To delete SMS and MMS messages, open the phone and
select Menu > Messages > select one of the message
types > Delete message.
To delete e-mail messages, open the phone and select
Menu > Messages > select one of the message types >
Delete e-mail.
Voice Mail
Your incoming calls can be forwarded to your voice mail.
Callers will be prompted to leave a message for you. This
feature requires you to enter a voice mail number which
is provided by your service provider. To set voice mail
number, open the phone and select Menu > Messages
> Voice mail > Voice mailbox no. Enter the number
provided by your service provider. Select OK. This
number should be used when you want to listen to your
stored voice mail messages.
When you need to listen to your incoming voice mail
messages, select Menu > Messages > Voice mail
> Listen to voice msgs. You are connected to your
mailbox where you can hear the stored voice mails
messages.
You can also select Menu > Messages > Voice mail >
Voice mailbox no. to edit the voice mail number.
For quick access to voice mail, press and hold
1.
Text Input Mode
When you enter text for messages and notes, the input
mode is displayed at the top left of the screen. Press and
release the # key to view the different text input modes,
that is conventional (Abc/ABC/abc).
In conventional mode, you can enter a letter by
repeatedly pressing a key until the letter you want
appears. Numeric mode is used to input numbers.
In T9 mode, when you press a key, the alphabets or
letters are displayed. Scroll to the alphabet or letter and
press the Menu key to select.
1. To switch between upper case (ABC), lower
case (abc) or sentence case (Abc), use key #.
When the sentence case is used, the letter which
comes immediately after the characters full stop
(.), exclamation mark (!) and question mark (?)
automatically becomes capital.
2. To enter a character, press the numeric key
repeatedly until the desired character appears on
the screen. For example, to enter GOOD, in the text
mode, press 4 once to display G, press 6 thrice to
display O, and again press 6 thrice to display O and
press 3 once to display D.
OR
If you are in T9 mode, press 4 once. Press 6 twice.
Press 3 once and the word GOOD appears. To
accept, press 1.
3. To insert a space between characters or words when
Managing Messages