User's Guide
Table Of Contents
- GENERAL INFORMATION
- Copyright © 2018 Sonim Technologies, Inc.
- Manufacturer’s Address:
- THIRD PARTY TRADEMARKS
- DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC EQUIPMENT
- DISPOSAL OF BATTERY
- GUIDELINE FOR HEADPHONE AND EARPHONE
- PHONE MODELS COVERED
- SONIM SUPPORT INFORMATION
- OPTIONS COMMONLY USED ACROSS MENU ITEMS
- MANAGING CONTACTS 26
- MANAGING CALL SETTINGS 29
- SENDING MESSAGES 31
- SONIM SCOUT 33
- APPLICATIONS 34
- TOOLS 36
- OTHER APPLICATIONS 38
- REGULATORY INFORMATION - USA
- MARKET 39
- HAZARDOUS LOCATION USAGE
- WARNING 42
- INDEX 43
- SAFETY GUIDELINES
- BATTERY USAGE
- YOUR SIM CARD
- GETTING STARTED
- USING YOUR SONIM XP3 DEVICE
- HOME SCREEN MENU OPTIONS
- QUICK SETTINGS
- MISSED EVENTS
- MANAGING WIRELESS & NETWORK
- MANAGING DEVICE SETTINGS
- MANAGING PERSONAL SETTINGS
- MANAGING SYSTEM SETTINGS
- MANAGING CONTACTS
- MANAGING CALL SETTINGS
- SENDING MESSAGES
- SONIM SCOUT
- APPLICATIONS
- TOOLS
- OTHER APPLICATIONS
- REGULATORY INFORMATION - USA
- HAZARDOUS LOCATION USAGE WARNING
- INDEX
9
BATTERY
YOUR SIM CARD
The SIM card associates your network services (for
example, phone number, data services etc.) with your
phone.
The Sonim XP3 device comes with two SIM card trays.
Following are the three different scenarios for both the
SIMs:
1. When both the SIM cards are inserted: At the time of
every boot up, a warning/pop-up message is displayed
Device has detected two SIM cards, SIM in Slot 2
will be disabled. Press OK to confirm. SIM with Slot 1
is enabled and SIM in slot 2 is disabled.
2. When Only SIM in Slot 1 is inserted: There is
no warning/pop-up message is displayed and
SIM in slot 1 is active/enabled.
3. When Only SIM in Slot 2 is inserted: There is no
warning/pop-up message is displayed and message
SIM in Slot2 is active/enabled.
REMOVING THE BACK COVER
REMOVING THE BATTERY
1. UNSCREW COVER
To open the battery
cover, rotate both the
battery cover screws
in counter clockwise
direction using the
Sonim provided
screwdriver tool (as
shown in the figure).
2. LIFT THE COVER
Lift the back cover to
reveal the battery.
1. UNSCREW COVER
To open the battery
cover, rotate both
the battery cover
screws in an counter
clockwise direction
using the Sonim
provided screwdriver
tool (as shown in the
figure).
2. LIFT THE COVER
Lift the back cover to
reveal the battery slot.
3. REMOVE THE
BATTERY
After removing the
back cover lift the
battery from the
battery compartment.