User`s guide

Getting started

3. If the battery is being charged when

the phone is switched off, only the bat-

tery icon with the message Charging is

displayed (as show in the adjacent fig-

ure). When the battery has been fully

charged, the message Completed is

displayed.

4. If the battery is being charged while the phone is

switched on, you will notice that the bars in the battery

charge icon show movement indicating that the

battery is being charged. After the phone is fully

charged the battery bars on the display stop scrolling.

You can disconnect the charger from the phone.

5. After the charging process has begun, the only way to

stop it is to disconnect the charger. If possible, use a

power jack that is easy to plug and unplug.

Tip: To protect the USB socket of the phone from

vibration during the charging process, dis-

able the vibrate function and use the ringing

function instead if you wish to leave your

phone on, while the battery is being

charged.

Set battery alert

When you set the battery alert, you get an indication when

the battery charge is low.

1. To set the battery alert select Menu > Quick set-

tings > Normal > Personalize > Battery alert >

On or, press Menu key to select the checkbox beside

Battery alert to activate the alert.

For more information on alerts, refer “Personalizing your

phone” on page 54

Your SIM card

Purchase a SIM card from your mobile operator. Your SIM

card stores your phone number and user registration infor-

mation. The SIM card can be used in any GSM phone. Your

phone number and user registration information always

remain the same.

Insert the SIM card

1. Ensure the phone is switched off.

2. Lift the battery cover and remove the battery. For

instructions refer “Insert and remove the battery” on

page 4.

3. Place the SIM card in the designated slot located at the

lower end of the phone.