User`s guide

8
Getting started
Operations in standby mode
The following can be accessed from the home screen when
the phone is in standby mode or when the phone is not
active.
Note: The four functions that are performed using
the navigation keys are set as factory defaults,
however they can be changed. You can also
configure new shortcuts.
Basic settings
When you have switched on your phone the name of the
service provider is displayed.
Security settings
1. To prevent unauthorized use of your phone, you can
set a PIN code. Select Menu > Settings > Security
settings > PIN code > On > OK. After this is set,
every time you power on the phone, you will be
requested to enter the PIN. If the PIN code is wrong
you cannot access the phone.
2. To change the PIN code select Menu > Settings >
Security settings > Change code > OK. You can
change codes for PIN, PIN2 and Call barring.
Date and time
1. To set the Date and Time, select Menu > Settings >
Date and time > OK.
Auto keypad lock
1. To lock the keypad, select Menu > Settings >
Phone settings > Auto keypad lock > OK. You can
choose to switch it off or enable the feature.
2. Alternatively press and hold the ‘*’ key to lock and
unlock the keypad.
Silent mode
In the silent mode, the alerts for Calls, Alarm, Organizer,
SMS, PTT calls, battery status will not work.
1. Select Menu > Quick settings > Silent > OK >
Enable.
Press To access
Up arrow Call list
Down arrow Phone book list
Right arrow Messages
Left arrow WAP options
PTT key PTT contacts
Menu key Main menu
Left selection key Main menu
Right selection key Phone book
Pickup/Send key Outgoing calls list
1Voice mail