User`s guide

23
Your XP1 phone
 Bearer: allows you to choose from two protocols for
WAP service. You can either choose GSM only or GPRS
only. GPRS is required to access the PTT service.
 GSM settings: The following GSM settings can be
configured:
Data call type: choose between ISDN and Analogue.
Phone number: enter the number you need to dial.
When your phone connects to the Internet, it will dial
this number automatically.
User name: the user name required to log in to the
WAP server.
User password: the corresponding password that
enables you to log in.
 GPRS settings: configures the settings for APN
(Access Point Name - a requirement for GPRS), User
name and User password required to log in to the
WAP/data server.
Manage the phone book
You can use the phone book to maintain phone numbers of
your contacts. This feature enables you to add, delete, dial
phone numbers and send SMS messages.
Note: When you switch on the phone, it takes some-
time for the phone book to initialize. Wait till
you can use the phone.
To access the phone book, on the home screen select
Phonebk, or select Menu > Phone book icon > Select.
The list of phone book options is displayed.
Alternatively to directly access the phone book list and its
allied options, press the Down navigation key to display
the Phone book list.
Add a new number
1. Choose the phone memory where you want to store
the phone number. On the home screen select
Phonebk > scroll to Select memory > OK.
2. Select either SIM card or Phone as the memory type
to store the new number and select OK. Select Exit to
revert to the Phone book.
Note: The SIM card stores the name and number of
the contact, while the phone memory stores
other contact details like, name, contact num-
ber (including mobile, office, home and fax),
email and postal address.
3. Scroll to Add New > OK. Enter the Name and Phone
number and select Save.
4. Select Yes to save a copy of the new contact to your
PTT contact list. Select No to revert to the Phone
book.
Alternatively, you can straight away enter a number and
select Option > Save. Enter the Name of the contact and
select Save. The new number is updated in the Phone book
list.