User`s guide

29
Make calls
enable Call waiting facility, refer “Call waiting” on
page 29.
Forward a call
If you are not available or choose not to answer a call, you
can use this function to forward your incoming calls to a
new number or an existing number in the Phone book list,
provided your network operator supports this service.
1. To access Call forward settings select Menu > Set-
tings > Call settings > Call forward > OK.
When Call forward is enabled, the icon is displayed at
the top of the screen when the phone is in standby mode.
Call barring
You can use this function to stop incoming calls. You can set
Call barring facility for outgoing calls, international calls,
local calls and all incoming or roaming incoming calls.
1. To set Call barring settings select Menu > Settings
Call settings > OK > Call barring > OK.
2. Enter a restriction password. (Your network operator
provides this before you use this function). This pass-
word will be sent to the network for verification.
 Cancel barring: when you cancel the call barring
facility you are prompted to enter a restriction pass-
word again. If the password is correct, your phone will
contact the network to disable this function.
 Barring status: when you check the status, your
phone will send a request to the network and the feed-
back will be displayed on your screen.
Call waiting
This facility can be used for GSM or GPRS calls.
GSM calls
When you receive any incoming GSM calls after this facility
is enabled, a message Call waiting is displayed. If you dis-
able this function, you will not be prompted when you
receive an incoming call and the caller will receive a busy
signal. You can enable or disable this function, or verify the
status.
Call Forward option Function
Unconditional Forward all incoming calls to
a pre-designated number.
If busy Forward calls when your
phone is busy.
If no reply Forward calls when you do
not answer the incoming
calls.
If unreachable Forward calls when you
have switched off your
phone.
Cancel Withdraw the Call forward
options.
Status Check the current Call for-
ward status.