User`s guide

Make calls

Review call information

1. Select Menu > Call list > Call meters > OK. The

following options are available:

 Last call: displays the time at which the last conversa-

tion was made.

 Last GPRS call: displays the transmitted bytes of the

last GPRS service.

 Call timer: displays the duration of all the incoming or

outgoing calls. Select Reset Timer > OK to restart

the counter or meter.

 Display cost: if enabled, displays the duration and

charges of the call. Disabled mode is the default mode.

 If you want to enable this function, you need to

acquire a PIN2 code from your network operator.

 Accum. charges: this service is only available when

your SIM card contains charging information. Use this

service to configure or view all charge information

related to your calls.

The following can be configured:

Tip: If the charges exceed the maximum limit,

you cannot make or receive calls. All charge-

able calls will be disconnected automatically.

 Call tariff: displays the rate per call unit. This infor-

mation is stored in the SIM card. You can also reset

and set the rate.

Show cost Displays total charges of

all outgoing and incom-

ing calls since the last

reset.

Reset charge count Resets the counter to zero

(protected by PIN2 code).

Show balance Displays available bal-

ance.

Show limit Displays maximum limit

available.

Cancel limit Cancels maximum limit

available on charges (pro-

tected by PIN2 code).

Set limit Sets maximum limit for

charges (protected by

PIN2 code).