User`s guide

41
Push-to-Talk
2. Release the PTT key when you finish speaking.
3. When the other person takes floor control the top of
the screen displays Start receiving Listen.
4. If you attempt to speak before the other person fin-
ishes speaking, Remote speaker is displayed on top of
the screen. Wait for the beep before you can begin
speaking.
5. When you end the call, the top of the screen displays
PTT call ended.
Make calls from the group list
A group has a set of pre-arranged members. A group PTT
call is similar to a one-to-many PTT call.
1. To access the group list select Menu > PTT > Group.
2. Scroll to a group and press the PTT key, Ringing is dis-
played on the screen.
3. When anyone from the group
responds, wait for the beep
and begin speaking. Group
session, Start sending, Speak-
ing is displayed at the top of
the screen.
4. Continue to hold the PTT key
while you are speaking and
release the key when you fin-
ish speaking.
5. If any member takes floor control, Start receiving, Lis-
ten is displayed at the top of the screen.
6. During the session the status of
all the members in the group is
displayed on the screen.
7. To add more members to the
group select Add, use the
Menu key to select more mem-
bers and select OK. Add user to
session is displayed at the top of
the screen.
8. As the initiator, if you select
Exit, the group session closes and all members get
disconnected from the session.
9. Select Exit to end a call.
Make unplanned group calls
Unplanned or ad hoc groups are created on the spur, unlike
groups that have a pre-arranged set of members.
1. To make an ad hoc group call,
press the PTT key, the list of
Contacts appears.
2. Use the Menu key as a toggle
key to select clear the check-
box against the contacts you
want to call.
3. Press the PTT key to initiate
the call Adhoc PTT invitation.
Start sending, Speaking is displayed at the top of the
screen.