User`s guide

43
Messages
Messages
SMS is a convenient and inexpensive means of communica-
tion. You can send a text message to other people via this
service. You can use the SMS menu in your phone to send
an SMS message to other mobile phones or any other
equipment that can receive SMS.
To access the SMS function select Menu > Messages >
SMS. The list of options is displayed.
Message settings
1. To view or define settings for your messages select
Menu > Messages > SMS > Settings > OK.
OR
Press the Right navigation key as a shortcut to the
Messages menu.
 Service number: is provided by your service provider.
This is the message center number via which your
messages are sent and received. This field can be
edited. Messages cannot be sent if this field is left
blank.
 Status report: enable this option to get a delivery
confirmation for the messages you send. Use the
Menu key to select the option and select OK.
 Reply path: if this option is enabled, messages that
are sent to your mailbox will be sent via your service
center rather than the sender’s service center. Use the
Menu key to select the option and select OK.
 Signature: enable this option to set a signature that
will be suffixed to your sent messages. Use the Menu
key to select the option and select OK. Enter the sig-
nature and select Save. If your message exceeds the
maximum number of characters, the signature auto-
matically gets omitted from your message.
 Validity period: sets the period to store your mes-
sages in the message center. Use the navigation keys
to choose the period. On expiry of the specified period
the messages are erased from the assigned memory.
 Memory: enables you to choose the memory in which
you can store the messages. The messages could
either be stored in the SIM card memory or the Phone
book memory.
Tex t inp u t mode
When you enter text, the input mode is displayed at the top
right of the screen. Press and release the # key to view the
different text input modes, such as, Conventional (Abc),
Predictive (T9) and numeric (123).
Conventional text input
The traditional mode uses the multi-tap method to enter a
character
1. To choose the input text for a character (abc / en T9 /
123), press and release the # key.