Verizon User Guide

21
NETWORK & INTERNET SETTINGS/CONNECTED DEVICES
ADVANCED CALLING
Wi-Fi calling is a service for phones providing the ability
to make and receive phone calls over a Wi-Fi connection.
It is simple to use with no separate application or log-in
required.
• Initially when the phone is switched ON, Wi-Fi calling
has to be updated with the emergency address and
other information, and the same has to be saved.
• To enable WI-Fi calling, initially Wi-Fi should be
enabled or else a messaged pops-up to enable
Wi-Fi.
• If Wi-Fi setup is not completed, a message is
displayed as Wi-Fi Calling Activation; Setup was
not completed under My Notications.
1. From Home screen, select Menu ( ) > Settings
( ) > Network & Internet ( ).
2. Select Wi-Fi Calling ( ).
• When Wi-Fi calling is ON, your phone can route
calls through Wi-Fi network or your carrier network,
depending on the signal strength and your
preferences.
AIRPLANE MODE
When your phone is set in airplane mode, network
connectivity or mobile data connectivity is disabled.
But you can access your camera, media les and other
features that do not require mobile connectivity.
To activate airplane mode:
1. From Home screen, select Menu ( ) > Settings
( ) > Network & Internet ( ).
2. Enable Airplane mode ( ).
RESET NETWORK SETTINGS
1. From Home screen, select Menu ( ) > Settings
( ) > Network & Internet ( ).
2. Select Reset network settings.
It reset all the network settings including Wi-Fi,
Cellular data and Bluetooth.
CONNECTED DEVICES
BLUETOOTH
Bluetooth is a short-range wireless communication
technology used to communicate between the devices
over a distance of about 8 meters.
You can perform the following tasks using Bluetooth
paired devices.
• Transfer media les and contacts between
connected mobile devices using Bluetooth.
• Use Bluetooth connected headphones for playing
media le.
• Bluetooth headset can be used during call.
SCANNING SETTINGS
1. From Home screen, select Menu ( ) > Settings
( ) > Connected devices ( ) > enable
Bluetooth ( ).
2. On the Bluetooth screen, select Options key ( )
> Scanning settings.
• Wi-Fi scanning: Turn ON this option to improve
location services by allowing the system apps and
services to detect Wi-Fi networks at any time.
• Bluetooth scanning: Turn ON this option to
improve location services by allowing the system
apps and services to detect Bluetooth devices at
any time.
DEVICE NAME
1. From Home screen, select Menu ( ) > Settings
( ) > Connected devices ( ) > enable
Bluetooth ( ).
2. On the Bluetooth screen, select Options key
( ) > Device name.
3. Rename the device screen is displayed.
4. Enter the desired name and select RENAME.
PAIR NEW DEVICE
You can activate Bluetooth and pair your XP3 device with
other Bluetooth devices:
A list of paired Bluetooth devices are displayed. Ensure
that Bluetooth is activated on the other device too.
1. From Home screen, select Menu ( ) > Settings
( ) > Connected devices ( ) > enable
Bluetooth ( ).
2. On the Bluetooth screen, select Options key
( ) > Pair new device.