Full-motion Wall Mount MD120409-01 AWM1521- AU
Safety Instruction Component Checklist IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installing. If any parts are missing or faulty, telephone your local distributor for a replacement. WARNING NOTE: Read the entire instruction manual before you start installation and assembly. • Do not begin the installation until you have read and understood the instructions and warnings contained in this installation sheet.
Disassemble VESA Plate 2. Mount on Solid Brick and Concrete Block loosen 60mm (2.4") ø 10mm (ø 3/8") 1 remove 1. Mount on Wood Stud Wall With arrow head pointing up 55mm (2.2") 2 ø 4.5mm (ø 3/16") Drill pilot holes 1 With arrow head pointing up 2 W-C W-A X W-B X 3 W-C Drill pilot holes W-A X X Screw the wall mount onto the wall Screw the wall mount onto the wall WARNING WARNING • Make sure that mounting screws are anchored into the center of the studs.
3. Installing Decorative Covers 5. Install VESA Plate Top of TV TV Insert both top and bottom plastic covers Then install the middle decorative cover. TV TV TV 4. Assemble VESA Adaptors M-C/M-D M-J M-G/M-H or M-A/M-B M-E/M-F M-I Screw the VESA plate onto the TV. Tighten all screws but do not over tighten.
7. Cable Management 6. Hook the TV onto the Wall Mount 4mm Attach cable clip to the arm using appropriate screw. H G E Hook the TV onto the wall mount Loosen the upper flat nut spacing 4mm to VESA plate. Connect cables to your TV and route cables through cable clip, then attach the cable cover to hold the cable in place. Note: Leave slack in cable for cantilever arm movement. 8. Adjustment 180° 180° +3° -3° +15° -15° · Level the TV. · Place the lower flat nut, tighten both flat nuts.
9. Adjustment M-J According to the different weight of the display, it is necessary to slightly loosen or tighten the adjustment screw using the supplied Allen key. Maintenance • Check that the bracket is secure and safe to use at regular intervals(at least every three months). • Please contact your dealer if you have any questions.
