E46Z11A -AU 46” FullHD LED TV
Table of Contents-------------------------------------------------------------------------------------------------- 1 Safety Instruction----------------------------------------------------------------------------------------------- 2-5 Accessories--------------------------------------------------------------------------------------------------------- 6 Introduction------------------------------------------------------------------------------------------------------- 7-8 Features-----------------------------
-2-
-3-
-4-
-5-
Accessories Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer. POWER INPUT 1 2 4 3 6 5 7 8 9 INFO 0 RECALL FREEZE SLEEP C H V FA .
Features l l l l l l l l l l l TV adopts 46”/55” TFT LED display screen Zero X radiation complies to green environment protection requirement Connect to computer directly to realize TV/monitor combo.
Specifications Model E46Z11A -AU Display size 46” Diagonal (max.) LED panel resolution 1920X1080 Speaker output power ≥5 W X2 Power supply ~110-240V, 50/60Hz TV receive system Digital: DVB-T Analog: PAL: BG, I, DK, SECAM: BG, D/K Frequency range Analog: Antenna: 46.25MHz-855.
Stand and wall-mounting instructions (optional) How to assemble the stand If you need to remove or assemble the stand please read the following instructions. -Before attaching/detaching the stand, make sure to turn off the TV. -Before performing work, spread cushioning over the base area to lay the LED TV on. This will prevent it f rom being damaged. Assembling instruction: 1) Assemble the stand and the unit together with five M4*12 screws.
Stand and wall-mounting instructions (optional) 3 - Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong cable. - Install the TV near to the wall so that it does not fall backwards. - It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on the TV. - Remove the cable before moving the TV. 4 - Verify all connections are properly secured. Periodically check connections for any sign of fatigue for failure.
General Description Overview of back panel You can connect the TV with video devices such as DVD/VCD player, VCR and video camera to enjoy the high quality picture.
General Description Overview of front panel The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control. 6 7 8 PROG PROG 5 4 3 2 Standby button Press button to toggle between normal and standby mode. PROG Press to change programs. In the on-screen menu, use the PROG buttons as up/down arrow buttons. 1 Press to display on-screen menu 7 POWER INDICATOR Red:In standby mode.
General Description Overview of Remote Control POWER INPUT 1 2 3 4 5 6 7 8 9 INFO 0 RECALL SLEEP FREEZE V FA C H .L IS T MENU OK/ REC LIST E ID EX IT U G DTV USB HDMI ASPECT MUTE VOL PROG AUDIO LANG RED GREEN YELLOW BLUE INDEX HOLD SIZE TEXT SUBTITLE MIX REVEAL CANCEL SOUND PICTURE PgUp PgDn TIME SUBCODE 1. INPUT: This button is used to switch among different sources: DTV,ATV, AV1, AV2, Component1, Component2, PC-RGB, HDMI1, HDMI2, HDMI3, HDMI4, USB.
General Description Overview of Remote Control POWER INPUT 1 2 3 4 5 6 7 8 9 INFO 0 RECALL SLEEP FREEZE V FA C H .L IS T MENU OK/ REC LIST E ID EX IT U G DTV USB HDMI ASPECT MUTE VOL PROG AUDIO LANG RED GREEN YELLOW BLUE INDEX HOLD SIZE TEXT SUBTITLE MIX REVEAL CANCEL SOUND PICTURE PgUp PgDn TIME SUBCODE 17. USB: Switch to USB mode directly or call the control menu in USB mode. Please see the details in “Digital Media Player” on Page40 to Page49. 18.
General Description Teletext POWER INPUT 1 2 3 4 5 6 7 8 9 INFO 0 RECALL SLEEP FREEZE C H .L V FA IS T MENU OK/ REC LIST E ID EX IT U G DTV USB HDMI ASPECT MUTE VOL PROG AUDIO LANG 13 RED GREEN YELLOW BLUE INDEX HOLD SIZE TEXT SUBTITLE MIX REVEAL CANCEL SOUND PICTURE PgUp PgDn TIME SUBCODE Teletext is an information system broadcast by certain channels which be consulted like a newspaper.
General Description Teletext POWER INPUT 1 2 3 4 5 6 7 8 9 INFO 0 RECALL SLEEP FREEZE C H .L V FA IS T MENU OK/ REC LIST EX IT E ID U G DTV USB HDMI ASPECT MUTE VOL PROG AUDIO LANG RED GREEN YELLOW BLUE INDEX HOLD SIZE TEXT SUBTITLE MIX REVEAL CANCEL 13 13 SOUND PICTURE PgUp PgDn TIME SUBCODE CANCEL The CANCEL button will exit from any Teletext on the display. Press CANCEL button again to exit Teletext and return to live TV broadcast.
General Description Installing Batteries in the Remote Control Installing Batteries 1 Open the battery compartment cover on the back side. 2 Insert two 1.5V AAA size batteries in correct polarity. Don´t mix old or used batteries with new ones. ATV DTV HDMI SLEEP INPUT SOUND PICTURE ZOOM Point the remote towards the remote control sensor of the TV and use it within 8 meters. Put the used batteries into the recycling bin since they can negatively affect the environment. 3 Close the cover.
External Connection Connecting VCR These instructions assume that you have already connected your TV to an antenna or a cable TV system. Skip step 1 if you have not yet connected to an antenna or a cable system. VCR Rear Panel 1 1 2 3 TV Rear Panel White Red Blue 2 Red AUDIO OUT VIDEO OUT Green ANT ANT OUT S-VIDEO 3 RF Cable (Not supplied) YPbPr cable(supplied) Audio Cable (Not supplied) Follow the instructions in Viewing a VCR or Camcorder Tape to view your VCR tape.
External Connection Connecting a Camcorder The rear panel jacks on your TV make it easy to connect a camcorder to your TV. They allow you to view the camcorder tapes without using a VCR. Each Camcorder has a different back panel configuration. When connecting a Camcorder or DVD, match the color of the connection terminal to the cable. 1. Connect a Video Cable between the AV1 VIDEO jacks on the TV and the VIDEO OUT jack on the camcorder. 2.
External Connection Connecting a DVD Player/Set-Top Box The rear panel jacks on your TV make it easy to connect a DVD to your TV. Component video separates the video into Y (Luminance (brightness)), Pb (Blue) and Pr (Red) for enhanced video quality. Be sure to match the component video and audio connections. For example, if connecting the video cable to COMPONENT IN, connect the audio cable to COMPONENT IN also. Each DVD player/STB has a different back panel configuration.
General Description External Connection Connecting a DVD Player/Set-Top Box via DVI This connection can only be made if there is a DVI Output connector on the external device. DVD Player/ Set-Top Box TV Rear Panel White Red 2 Audio Cable (Not supplied) 1 DVI to HDMI Cable (Not supplied) Each DVD player/STB has a different back panel configuration. When connecting a DVD player/STB, match the color of the connection terminal to the cable. 1.
External Connection Connecting DVD Player/Set-Top Box via HDMI This connection can only be made if there is a HDMI Output connector on the external device. DVD Player/ Set-Top Box HDMI Cable (Not supplied) What is HDMI? HDMI, or high-definition multimedia interface, is a next-generation interface that enables the transmission of digital audio and video signals using a single cable without compression.
External Connection Connecting Digital Audio System The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV. Digital Audio System TV Rear Panel (Black) Coaxial Cable (Not supplied) 5.1 CH audio is possible when the TV is connected to an external device supporting 5.1 CH. 1. Connect an Coaxial Cable between the OUT SPDIF jacks on the TV and the Digital Audio Input jacks on the Digital Audio System.
External Connection Connecting PC PC 2 PC Audio Cable (Not supplied) 1 D-Sub Cable (Not supplied) Each PC has a different back panel configuration. The HDMI jacks do not support PC connection. 1. Connect a D-Sub Cable between VGA connector on the TV and the PC output connector on your computer. 2. Connect a PC Audio Cable between AUDIO IN jack on the TV and the Audio Out jack of the soundcard on your computer.
Basic Operation Turning the TV On and Off 1 How to turn the TV on or off 1. Insert the power cord plug into a polarized AC outlet. 2. If TV is in standby mode Press POWER button on the remote control or button on the bottom panel of LED TV. 3. Normal picture will be displayed on the screen after 15 seconds. If no signal input, "No Signal" will be displayed on the screen. 4. If temporary POWER off is required, press POWER button on the remote control or bottom panel. button on the 5.
Basic Operation Menu operation 1 2 3 Input Setup Press INPUT key on the remote control to enter "INPUT SOURCE" menu. There are twelve options for you to select: DTV, ATV, AV1, AV2, Component1, Component2, PC-RGB, HDMI1, HDMI2, HDMI3, HDMI4 and USB Use ▲/qkey to move the cursor to the input you desired and press OK key to confirm.
Basic Operation Menu operation 4 Current Channel Information Press INFO key on the remote control to view current channel information, the indications of channel information are listed in the following table. 9 Nine Digital DTV 576i SD Subtitle Age 11 Nine Digital THE SHAK Wednesday 17 Jun 2009 DOLBY MPEG 09:41 12:00 10:47 NEXT Fears Ahhhh, it’s time to face your fears!! it’s a scary day at The Shak with the theme of Fears-Eco. Curio. Press EXIT key on the remote control to exit this OSD.
Basic Operation Menu operation Prev.Day: If you press the red key on the remote controller, It will show Previous Day’s programs. Next Day: If you press the green key on the remote controller, It will show Next Day’s programs. Schedule: If you press the yellow key on the remote controller, It will show the reminder list. Reminder: If you press the blue key on the remote controller, It will show a command window, and you can set the reserve programs.
Menu system instruction Picture Standard: Selects the picture for optimum display in a normal environment. Mild: Selects the picture for comfortable display in a dark room. Bright: Selects the picture for high-definition in a bright room. User: Select to view your favorite display settings (see User settings for PICTURE). Sports: Selects the picture for high-definition in a bright room.
Menu system instruction 1. Press MENU key to display the main menu on the screen. 2. Press p/q key to select "Sound" option. 3. Press u key to enter "Sound" submenu. 4. You can also press the SOUND key on the remote control to select one of the sound settings. Sound Mode You can select the type of special sound settings to be used when watching a given broadcast. Your TV has eleven sound settings (“Standard”,“Movie”, “Sports”, “User”) that are preset at the factory. 1.
Menu system instruction Sound Surround Sound This is used to turn on surround sound to gain better sound effect. 1. Press p/q key to select "Surround sound" option. 2. Press t/u key to select “ON” or “Off”. Auto Volume Each broadcasting station has its own signal conditions, and it is inconvenient to adjust the volume every time the channel is changed.
Menu system instruction Channel Auto Search Press p/q key to select "Auto Search" option. Then press OK or u key to start a notice window. In this notice window, you can select country in the “Country Selection” option and set “Tune Type” option. Press button to select "Start" , and press OK button to search, then the searching interface will be on the screen as follows: (If you want to exit, press // button to select “Cancel", and press OK button to exit.) CHANNEL 1.
Menu system instruction Channel DTV Manual Search DTV Manual Search In the DTV source, you can choose “DTV Manual Search” to enter “DTV Manual Search” menu. You can use /button to choose the channel number and press OK button to enter searching, and then the TV will store the DTV channel if there is a DTV signal present.
Menu system instruction 1. Press MENU key to display the main menu on the screen. 2. Press p/q key to select "Time" option. 3. Press u key to enter "Time" submenu. TIME Time Clock 10:02 On Time Off Time Sleep Timer Time Zone Clock Off/On Time In "Off Time" item, press button or OK button to enter the submenu, set the day & time to turn off the TV set. In "On Time” item, press /button or OK button to enter the submenu, set the time to turn on the TV set, when the TV set is in the standby mode.
Menu system instruction 1. Press MENU key to display the main menu on the screen. 2. Press p/q key to select "Option" option. 3. Press u key to enter “Option” submenu. OPTION Option OSD Setting You can modify the OSD set to suit your user preferences. Screen Saver This option is only used in ATV mode. 1.Press p/q key to select “Screen Save” option. 2.Press t/u to choose on or off. Screen Saver Aspect Ratio Reset Lock Software updata(USB) Hearing Impaired PVR File System Select OPTION 1.
Menu system instruction Option Lock The lock feature requires a Password to be entered before any settings can be changed. 1. Press MENU key to display the main menu on the screen. 2. Press p/q key and select "Lock" under the "Option" menu. 3. Press OK or u key to enter "Lock" submenu, "Enter Password" menu will appear, enter your 4-digit password to enter "Lock" submenu (the default and universal password is 0000, the almighty password is 1980). Lock System 1. Press p/q key to select "Lock System" option.
Menu system instruction 1. Press MENU key to display the main menu on the screen. 2. Press p/q key to select "Function" option. 3. Press u key to enter “Function” submenu. Noise Reduction 1. Press p/qkey to select "Noise Reduction" option. 2. Press t /u key to select "Off", "Low", "Middle", "High" to improve the picture sharpness. Note: Noise Reduction doesn't work in VGA Mode.
Menu system instruction PVR PVR File System WARNING: 1. Before connecting your USB device to the TV, please back up your files to prevent them from damage or loss of data. 2. A USB disk must be formatted when first used for PVR. Any existing data on the disk will be lost during the formatting process. Please back up your disk if you do not want to lose this data. You are recommended to use a dedicated disk for PVR use only. Do not disconnect disk or power during formatting. 3.
Menu system instruction PVR PVR Guide If the disk for PVR is ready, the programs can be recorded in DTV mode. Time shift In DTV mode, press “ ” button to pause the DTV program, press it again to continue play. The length of time a program can be paused depends upon the setting in the PVR File System.Press “EXIT” to show or hide the control menu. Time Shift POWER INPUT 1 2 3 4 5 6 7 8 9 INFO 0 RECALL SLEEP FREEZE MENU 04:55 H V FA .
Menu system instruction PVR Instant recording 1. Select the desired channel then press the RECORD button on the remote control to start recording the current broadcast, a progress bar will be displayed at the bottom of the screen. - During recording, the progress bar will fade out after 10 seconds. 2. Recording stops when you press the STOP button and the recorded file is stored in the external USB device automatically. NOTE: You can only watch channels on the same frequency as the program being recorded.
Digital Media Player Introduction This TV is embedded with one USB port digital media player. It can find devices that support USB1.1 /2.0,including flash disk, USB hard disk and digital camera. It supports functions as: Display pictures, Play music files, Play video files, Display text files. Note: please do not remove the cable during the data transfer. It may cause problems for the system.
Digital Media Player Device and File Management Initialization Interface Enter the USB channel, the interface shown in Figure 1. If no inserted U disk, the system will be prompted to insert the USB device, while the lower right corner screen displays "No Device" message. When you insert a U disk, select the first letter located in the C drive, shown in Figure 2. The corresponding buttons as follows: Left and right keys: Select the drive letter. OK key: to enter the selected letter.
Digital Media Player USB support character 1.JPEG Play Prev Next Rotate Proportion PlayMode Music Stop Music Stop Music Stop Music Stop Music Stop Play Control menu Key operation Left, Right: Select Options OK button: the selected function key to enter the selected secondary function key menu. Play 1.JPEG Play / Pause: Play / Pause Picture. Prev: Play on a picture. Next: Play the next picture. Rotate: Rotate the image counter-clockwise along.
Digital Media Player Digital Media Player USB support character 1.JPEG Playlist Playlist: Show all the image files. Shown Info as Figure 10 . Up Down keys: select the image file. OK button: Play the selected picture file. Left Right keys: Exit playlist, and select other options. Exit button: Exit Playlists Playlist Water lilies.jpg Blue hills.jpg Winter.jpg Sunset.jpg nga_549617.jpg 1/1 Info: Display the name of the picture playback, resolution, size and date.
Digital Media Player USB support character Action: Up,Down keys: Select the music file OK button: Play the selected music files Left, Right keys: Exit playlist, and select other options Exit button: Exit Playlists Bonnie Winds.
Digital Media Player USB support character PLAY Video Video player interface Shown as Figure 19 Action: Left, Right: rewind / fast forward Upper and lower key: on a / the next one Exit: exit the video player interface, return to video browsing interface. Menu key: enter the playback control menu. Shown as Figure 20 Ad.
Digital Media Player USB support character Proportion: Select the display ratio video playback. Shown in Figure 23. 1.Auto 2.16 : 9 3.4 : 3 Source of the film will switch to automatic mode by default. Ad.mpeg Play FB 00:00:03/00:04:07 FF Prev Next Switch Proportion PlayMode ByOrder Single PlayLoop Play Mode: Shown as Figure 24 1.ByOrder: Play video as order. 2.Single: Repeat single video. 3.PlayLoop:Play all the video in order loop. Ad.
Digital Media Player USB support character 4.Text Features: browse and play text files under the specified path (default path is the current disk, set the video interface, the method please refer to the specified path: Path - setting) Content: Displays the playback text files under the specified path. Shown in Figure 30 Default path C:\ The Wonderful Wizard of Oz . txt PHOTO Around the World in 80 Days. txt MUSIC How To Be Happy At Work. txt MOVIE Ernest Hemingway's corpus. txt TEXT Jane Eyre.
Digital Media Player USB support character Goto Page: Select this feature, the pop-up dialog box jump page, the user can enter the page number to view the page, select OK option, and enter the designated page, click Exit to return to playback control menu. Playlist: displays document files can be played. Shown as Figure 34; Show the name, size of the document playing. As shown in Figure 35. Prev Page Next Page Prev Next Stop Music Goto Page Playlist Playlist The Wonderful Wizard of Oz .
Digital Media Player USB support character Current Disk: Set "Photo", "music", "video", "document" for the entire query path specified disk. This option is selected, each time a user visit the "Photo", "music", When this option is select, each time user visit the PHOTO, MUSIC, VIDEO, TEXT user can access to all the photos/musics/videos/texts contained in current disk.
Troubleshooting If you have any problem, check the couter measures for each symptom listed beiow. The following symptoms may have been. caused by inappropriate adjustment rather than actual malfunction of the unit. If the trouble persists, contact the Customer Care Centre, see back page for contact details. Symptoms Possible solutions No power Please check the power cord plugged in and that the power outlet works. Unplug the power cord and plug it in after 60 seconds and restart the TV.
Troubleshooting After Auto Tuning only some channels are available Check your area is covered by Digital Video Broadcasts. Try re-tuning or manually tuning missing channels. Check that you are using the correct antenna type - please see pg.16 'Antenna connection'. Channel cannot be selected Check if the channel has been blocked in the main menu settings. USB not playing Please check connecting USB cable and power supply is connected.Hard drive has not been formatted.
Picture defects and the reason Troubleshooting Ghosting may also occur when still pictures are displayed continuously. It may disappear after a few moments.
39038416 MD110923-01
