Manual

System ConnectionSystem Connection
1615
6. Headphone Connection
H10 is a HI-FI power amplifier, as well as a headphone amplifier. You can enjoy the wonderful
music with the headphone.
H10
7. Power Cord Connection
①.
② . Press the power switch to“On”, and then the machine starts working; Press the power
switch to“Off”, and then the machine will stop.
Plug the power cord to the power socket after finishing other connections.
①.Place the remote control upside down.
②.Press the sunken position, and then buckle downward.
③.Place the new battery according to the positive electrode and negative electrode directions
listed on the battery stand.
④.Push the battery stand to the original position.
⑤.Change the battery when the remote control doesn't work.
8. Installation of Remote Control Battery
9. Remote Control Operation
①.Aim the remote control directly at the remote sensor.
②.In order to avoid weakening the controlling effect, please don't lay any obstacle between the
remote control and the remote sensor.
3V
CR202 5
CR202 5
3V
CR2025
CR2025
CR2025×1
CR2025×1
CAUTION
PLEASE REMOVE THE BATTERY
WHEN THE REMOTE CONTROL
IS NOT IN USE FOR LONG PERIOD OF TIME
BATTERY TYPE:CR2025 RATED VOLT:3V/DC
Pay attention to the volume and listening time, in case that it will hurt your auditory system.
◆ Don't drop the remote control.
◆ Keep the remote control dry.
◆ Use the battery with specification of CR2025/3V.
◆ Do with the used battery (with chemical substance) properly.
①.Plug the headphone with 3.5 mm diameter to the headphone output jack in the front panel.
② .The machine will shut down the terminal signals from the left and right channels after the
headphone is plugged.
Note:
Note:
OFF
ON
TI .6 AL 25 0V
PC-DA C
L+
L-
R+
R-
L
R
FM ANT
AUX IN
SPEAK ER