DAB+ Combo Syste m w i t h i Ph o n e / iPo d Dock MD110820-01 i400 - AU
Welcome Safety Instructions i400 SAFETY INSTRUCTIONS Instruction Manual Thank you for purchasing the i400 Micro system. We strongly suggest that you study these operating instruction carefully before attempting to operate the unit, and that you note all of the listed precautions. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE ANY COVER. NO USER-SERVICEABLE PARTS INSIDE, REFER ANY SERVICING TO QUALIFIED SERVICE PERSONNEL.
Safety Instructions Introduction SAFETY INSTRUCTIONS INTRODUCTION This symbol means that this unit is double insulated. An earth connection is not required. Contents: 1 x Main unit, 2 x Speakers, 1 x Remote control, 1 x Instruction book, 2 x AAA batteries & iPod adaptors. FUNCTIONS & CONTROLS CAUTION CLASS 1 LASER PRODUCT Improper use or adjustment of performance may result in hazardous radiation exposure. LASER SAFETY This unit employs a laser, only qualified service personnel should attempt repair.
Getting Started Functions & Controls FUNCTIONS & CONTROLS GETTING STARTED Fitting the remote control batteries Remote Control 29 19 20 21 22 DAB/FM 30 31 32 33 34 23 24 25 26 27 28 35 36 37 38 39 40 41 19. STANDBY button 20. FUNCTION buttons 21. MENU button 22. INFO button 23. ENTER button 24. / Buttons 25. REPEAT buttons 26. PROGRAM button 27. DSP button 28. LOUD button 29. EJECT button 30. NUMERIC keys 31. ALARM button 32. SLEEP button 33. CLOCK button 34. NAVIGATION buttons 35. MUTE button 36.
General Operation General Operation GENERAL OPERATION GENERAL OPERATION Switching on the i400 for the first time Setting the Time & Date 1 . C onnect the mains plug to a wall outlet. 2 . E xtend the pig tail antenna as far as it can go. 3. S et the Power ON/OFF switch to ON to power on the unit. 4. The radio will auto tune and operate the quick scan. Clock settings must be completed in STANDBY mode. Scanning ... POWER ON WELCOME 12 > < 1. Press the CLOCK button on the remote. 2.
Listening to DAB+radio General Operation GENERAL OPERATION LISTENING TO DAB+ RADIO Sleep Timer Switching Modes To use the sleep timer function, the unit cannot be in standby mode. To switch between the available modes:CD, FM,DAB+, iPod & AUX IN. Press the FUNCTION button(unit) to cycle through the options or press the relevant buttons on the remote control from CD, DAB+ / FM (press twice to select FM), iPod & AUX IN. 1. To activate the timer, press the SLEEP button to open the option screen. 2.
Listening to DAB+ radio Listening to DAB+ radio LISTENING TO DAB+ RADIO LISTENING TO DAB+ RADIO Secondary Services Ensemble Name DL S ( Scrolling text ) Channel Frequency Signal Strength On some occasions you will see a “>” symbol directly after the name of the station. This indicates that there are secondary services available to that station. These secondary services contain extra services that relate to the primary station, e.g. a sports station may want to add extra commentaries.
Listening to DAB+ radio Listening to FM radio LISTENING TO DAB+ RADIO LISTENING TO FM RADIO DRC (Dynamic Range Control) Its function is to reduce the dynamic range of audio signal. The purpose of this is to adapt the dynamic range of the audio signal so as to listen to radio in a noisy environment. Storing Station Presets It is avaibale to store 10 of your favourite stations. This will enable you to access your favourite stations quickly & easily. NOTE: this is not available on some DAB+ stations. 1.
Listening to a CD Listening to a CD LISTENING TO A CD LISTENING TO A CD 1 . Make sure you are in CD mode, if not, press the CD button on the remote or press the FUNCTION button repeatedly until you reach CD. 2. Press the EJECT button, when the disc drawer pops out, insert a disc (label side facing upwards), press the EJECT button again to close. 3.
Connecting External Audio Sources Listening to an iPod LISTENING TO AN iPod CONNECTING EXTERNAL AUDIO SOURCES Connecting an iPo d t o the i400 External audio sources such as non iPod MP3 players can be connected using a 3.5mm to RCA audio (not supplied). 1. Remove the plastic cover from the dock. 1. Connect one end of the cable to the MP3 players headphone/ line output and the other end to the AUX IN input on the back of the unit. 2.
Universal Dock Adapter Care and Maintenance UNIVERSAL DOCK ADAPTERS CARE AND MAINTENANCE iPod Description Capacity 3 iPod mini 4GB & 6GB 7 iPod photo 40GB & 60GB 8 iPod nano 2GB & 4GB 9 5G iPod (with video) 30GB 10 5G iPod with video 60GB &80 GB 11 iPod nano (2nd generation) 4G, 8GB, 16GB 13 iPod nan o (3 r d generation ) 4GB , 8GB &16GB 14 iPod touch 8GB & 16GB Adapter No.
Trouble Shooting TROUBLE SHOOTING PROBLEM CAUSE SOLUTION No Sound Volume not t urned up Adjust the main volume knob St atic Sound Signal reception too low Adjust the antenna or mov e the unit to a stronger signal location Sound is distorted Volu me is too high Desired station not found Weak signal Us e the Manual Tune function No DAB+ coverage in your area. Check station availability www.ukdigitalradio.
