iV220T -1-
CONTENTS SPECIAL FUNCTIONS ........................... 25 Display function ..................................... 25 Locating a specific title (DVD) ............... 25 Locating a specific chapter/track .......... 25 Locating a specific time ........................ 25 REPEAT PLAYBACK ...................... 25 - 26 Repeating a chapter (DVD) .................. 25 Repeating a single track (CD) .............. 26 Repeating a specific section (DVD) (CD) ... .........................................................
SAFETY PRECAUTIONS The lightning flash with an arrowhead within a triangle alerts you to uninsulated dangerous voltage within the product’s enclosure that could cause an electric shock. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The exclamation point within a triangle alerts you to the presence of important operating, maintenance and servicing instructions in this user’s manual. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
SAFETY PRECAUTIONS Warning High voltages are used in the operation of this unit. Do not remove the back cover of the cabinet. Refer servicing to qualified service personnel. Warning To prevent fire or electrical shock hazard, do not expose the main unit to rain or moisture. Warning Do not drop or push objects into the television cabinet slots or openings. Never spill any kind of liquid on the television.
SAFETY PRECAUTIONS Caution Do no placed the main unit on an unstable cart stand, shelf or table. Serious injury to an individual, and damage to the television, may result should it fall. Caution When the unit is not used for an extended period of time, it is advisable to disconnect the AC power cord from the AC outlet. Caution Avoid exposing the main unit to direct sunlight and other sources of heat. Do not position television receiver directly on other products which give off heat. E.g.
INTRODUCTION Introduction Thank you for purchasing the unit. Your unit will bring you years of high-quality viewing enjoyment. The television is easy to operate and provides exceptionally high quality image. The manual will explain the operation of the unit, including its functions features and other important features. Before installing or operating your unit, please take the time to thoroughly read this manual, particularly the sections on safety.
DISC FORMATS ICONS USED ON DVDs The unit can play: Sample Icons: DVDs [8cm/12cm disc] Audio CDs [8cm/12cm disc] Language selections for audio CD-R CD-RW Language selections for subtitles Compatible Screen aspect ratio Multiple camera angles Region code indicator REGION MANAGEMENT INFORMATION Region Management Information: This unit is designed and manufactured to respond to the Region Management Information that is encoded on DVDs.
MAIN UNIT CONTROL Front & Side Panel 1 2 3 4 5 11 12 6 7 8 No. 1 2 9 Name 10 Description / I button Turns the unit on and off. PLAY button Press to start or resume playback of a disc. 3 MENU button Press to display the on-screen TV menu. 4 FUNCTION button Select DTV, TV, AV, DVD, iPod or PC. 5 CH buttons Press to change the TV channels and highlight selections (Up & Down) on the menu screen. Press to select previous chapters or tracks on a disc.
MAIN UNIT CONTROL Rear Panel 13 14 15 16 17 18 19 20 No. Description Name 13 Power Cord Connect to the AC wall outlet. 14 DVD VIDEO OUT AUDIO/VIDEO IN Jacks Connect composite Audio/Video output of your AV device. 15 16 17 18 PHONES jack TV Antenna Cable Terminal - Coaxial TV antenna input Connect to external antenna.
REMOTE CONTROL 1 2 3 9. 4 5 6 7 8 10. 11. 9 10 11 12 13 14 15 16 17 18 19 20 12. 13. 14. 21 1. STANDBY/ON button Press to turn ON the unit or press again to switch to STANDBY (OFF) mode. 2. TV / DTV button Press to switch to TV / DTV mode. 3. DVD/iPod button Press to switch DVD / iPod mode. 4. Number (0 - 9) buttons Use to change the TV / DTV channels. 5. REVEAL button Press to reveal answers on a quiz or game pages from Teletext.
REMOTE CONTROL 22 23 24 29. 25 26 27 28 30. 29 30 31 32 33 34 35 36 37 38 31. 32. 22. FUNCTION button Press to switch between DTV / TV / AV / DVD / iPod / PC / HDMI. 23. RADIO button Press to select DTV digital radio programmes. Press again to exit to normal DTV programmes mode. 24. AV button Press to switch to source connected to AV. 25. LAST CH button Press to switch repeatedly between the last two channels displayed. 26. TV MENU button Press to display the on-screen TV menu. 27.
GETTING STARTED USING THE REMOTE CONTROL When using the remote control, aim it at remote sensor on the unit. If there is an object between the remote control and the signal remote sensor on the unit, the unit may no operate. • Point the remote control at the remote sensor located on the unit. • When there is a strong ambient light source, the performance of the infrared remote sensor may be degraded, causing unreliable operation. • The effective distance for remote operation is about 16 feet (5 meters).
CONNECTIONS CONNECTING A TV ANTENNA To view television channels correctly, a signal must be received from an indoor or outdoor aerial antenna. NOTE For receiving over-the-air TV broadcasts, we recommend that you use an external fixed antenna. Should you require the use of a temporary antenna, please ensure that you purchase an antenna with sufficient ability to receive in weak signal areas.
CONNECTIONS CONNECTING A PC Connect the 15-pin D-SUB PC/VGA connector from your computer to the 15-pin D-SUB PC/VGA input on this unit using a monitor cable and an audio cable (not included) as shown. Make sure you connect the cable from the computer (PC Connector and AUDIO - PC OUT) to this unit (MONITOR / VGA and AUDIO - PC IN).
USING HEADPHONES • Turn down the volume before connecting headphones to the unit, then adjust the volume to your desired level. • When headphones are connected, no sound will come from the front speakers. NOTE Avoid listening to sound at high levels for prolonged periods of time. This may be harmful to you and may cause hearing loss. Headphones (1/8” [3.5mm diameter plug) UNIT OPERATION TURNING THE UNIT ON When the AC power cord is connected, press the / I button on the unit to turn it on.
BASIC OPERATION When you turn on your television set for the first time, be sure to place it on a solid stable surface. To avoid danger, do not expose the TV to water, or a heat source (e.g. lamp, candle, radiator). Do not obstruct the ventilation grid at the rear and be sure to leave sufficient gaps around the unit as shown. TURNING THE UNIT ON FOR THE FIRST TIME The first time you turn the unit on, it will go straight into Auto scan mode.
BASIC OPERATION ELECTRONIC PROGRAMME GUIDE (EPG) FOR DIGITAL TV (DTV) While watching a DTV programme, you can press the GUIDE button to display the PROGRAMME GUIDE menu, and check for programme information. • Use the , , , button select a programme, the programme time and name displays, press the INFO button to display detailed information if available. Press the INFO button again to return. • Press the YELLOW button to highlight programme date, use the / button to display information for other dates.
TV / DTV SETUP TV Setting (only in ATV or DTV mode) 1. Press the TV MENU button. 2. Use the or button to select TV SETTING. 3. Use the or button to select the options (Auto Tuning, DTV Manual Tuning, ATV Manual Tuning, Programme Edit), adjust them using the or button 4. Press the TV MENU button to return to previous menu, repeat step 2 to adjust other settings. 5. To exit the setup menu and return to the normal screen, press the EXIT button.
TV / DTV SETUP PICTURE MENU 1. Press the TV MENU button. 2. Use the or button to select the options (Picture Mode, Contrast, Brightness, Colour, Sharpness, Tint, Colour Temp), adjust them using the or button. 3. Press the TV MENU button to return to previous menu. 4. To exit the setup menu and return to the normal screen, press the EXIT button.
TV / DTV SETUP time MENU 1. Press the TV MENU button. 2. Use the or button to select the TIME. 3. Use the or button to select the options (Clock, Sleep Timer, Time Zone), adjust them using the or button. 4. Press the TV MENU button to return to previous menu. 5. To exit the setup menu and return to the normal screen, press the EXIT button. • Clock : The clock is set automatically when receiving a digital signal.
TV / DTV SETUP Lock MENU 1. Press the TV MENU button. 2. Use the or button to select the LOCK. 3. Press the ENTER•OK or button to enter, enter password to proceed. (The default password is 0000.) 4. Use the or button to select the options (Lock System, Change Password, Block Programme, Parental Guidance), press the ENTER•OK or or button to adjust. 5. Press the TV MENU button to return to previous menu. 6. To exit the setup menu and return to the normal screen, press the EXIT button.
TELETEXT Teletext is an information system that displays text on your TV screen. Using the Teletext control buttons you can view pages of information that are listed in the teletext index. Please Note On Screen Display is not available in text mode. The contrast, brightness and colour cannot be changed but the volume control is still available. Analog and Digital text look very different and operate differently. For Analogue text press the TEXT button in ATV mode.
CD / DVD OPERATION This owner’s manual explains the basic instructions of this unit. Some DVDs are produced to limit operation during playback. For example, many DVDs do not allow users to skip government warnings, or in some cases previews or other features. This is not a defect in the unit. Refer to the instruction notes of discs. “ ” may appear on the screen during operation. A “ ” means that the desired operation is not permitted by the unit or disc. PLAYING A DISC 1.
CD / DVD OPERATION FAST FORWARD / FAST REVERSE 1. Press the SEARCH or • Each time the SEARCH following sequence: 2. Press the SEARCH button when a disc is playing. or SEARCH button is pressed, the speed of fast scan changes in the PLAY button when you reach the desired point to resume playback at normal speed. SLOW-MOTION PLAY (DVD) 1. Press the SLOW button on remote control in the play mode.
SPECIAL FUNCTIONS DISPLAY FUNCTION (DVD) While the disc is playing, press the DISPLAY button repeatedly to display information on operation status. LOCATING A SPECIFIC TITLE (DVD) If a DVD disc contains title numbers, you can locate a specific title by directly selecting a title number. 1. In STOP mode, press the GOTO button. 2. Press the or button to highlight a specific field and press the corresponding number button(s) for the title you want. 3. Press the ENTER•OK button to confirm.
REPEAT PLAYBACK You can play a single track or an entire disc repeatedly. Repeating a single track (CD) You can play the same track repeatedly. 1. While the disc is playing, press the REPEAT button until the “ The current track is played repeatedly. ” indicator displays on the screen. Repeating an entire disc 2. While the disc is playing, press the REPEAT button until the “ The entire disc is played repeatedly. To resume normal playback 3.
CUSTOMIZING THE DVD FUNCTION SETTINGS LANGUAGE SETUP Language Setup 1. In Stop mode, press the SETUP button. 2. Use the or button to select the option Language Setup, then press OSD Language Audio the button to move the highlight bar on OSD Language. (Note that Subtitle DVD Menu Audio, Subtitle and DVD Menu can be activated by pressing the STOP button twice.) 3.
CUSTOMIZING THE DVD FUNCTION SETTINGS SYSTEM SETUP 1. In Stop mode, press the SETUP button. 2. Use the or button to select the System Setup, then press the button to enter. 3. Use the or button to highlight the option (Parental Ctrl, Password or Default), then press the button to enter. 4. Use the or button to select the desired setup option. 5. To exit the SETUP MENU and return to the normal screen, highlight the Exit Setup Mode ( ) and press the ENTER•OK button. Parental Ctrl Password Default ...
USING TO YOUR iPOD Before docking your iPod. MAKE SURE your iPod has the latest FIRMWARE. CONNECTING YOUR iPod Warning: To prevent damage to the unit and/or your iPod, connect or remove your iPod when the unit is powered off or the unit is not in iPod mode. 1. Open the iPod docking door. 2. Insert your iPod into the connector in the dock. 3. Press the DVD/iPod button to select the iPod mode. Your iPod will be connected automatically, and iPod Home menu appears.
USING TO YOUR iPOD Using a iPod Classic / iPod Nano 3rd generation to watch the video 1. Press the / button on remote control to select “Videos” on iPod panel, and then press the ENTER•OK button on remote control to confirm. 2. Use the / button on remote control to select from Movies, Rentals, TV Shows, Music Videos, Video Playlists or Settings, and then press the ENTER•OK button on remote control. 3.
USING TO YOUR iPOD PLAYING PHOTOS 1. In iPod Home menu, use the / button to select Photos and press Docking System for iPod the ENTER•OK button. “Plesae navigate directly on your iPod OR Please Insert iPod Music Press the [ iPod SWITCH ] key to go back to main menu” appears Videos on the screen. Photos 2.Use the / button to navigate the iPod menu lists and select a photo, Settings press the ENTER•OK button twice to begin playback. (If necessary, use the control wheel and keys on your iPod to operate it.
USING TO YOUR iPOD SETTINGS 1. In iPod Home menu, use the / button to select Settings and press the ENTER•OK button. 2. Use the / button to select from Shuffle, Repeat or Language. Press the ENTER•OK button to enter the settings. 3. Use the / button to a setting, press the ENTER•OK button to confirm. 4. Press the iPod RETURN button on remote control to go back to the previous menu. • Shuffle : Select from Shuffle Off, Shuffle Songs and Shuffle Albums.
TROUBLESHOOTING GUIDE SYMPTOM CAUSE (AND REMEDY) No power. • • • • • • The remote does not function. Check that the AC power cord is connected. The unit is not turned on. Remove any obstacles between the remote and the unit. Use the remote near the unit. Point the remote at the remote sensor on the unit. Replace the batteries in the remote with new ones. DVD No sound or only a very low-level sound is heard. • Make sure that you select DVD mode. • The system is in pause mode.
TROUBLESHOOTING GUIDE SYMPTOM TV CAUSE (AND REMEDY) Why have I lost some/ all of my channels? • It happens sometimes, if you have a weak signal. Usually it just means you’ll need to rescan your digital box or TV or adjust your antenna. And once you’ve done it, you should get all the free-to-air channels available to you. If problems persist you may need to get your aerial checked. Talk to your retailer or contact your local aerial installer.
- 35 -
