L32V11D-NZ
Safety Instruction----------------------------------------------------------------------------------------2-5 Accessories---------------------------------------------------------------------------------------------------- 6 Introduction------------------------------------------------------------------------------------------------- 7-8 Features--------------------------------------------------------------------------------------------------------- 7 Specifications--------------------------------------------
2
3
4
5
Accessories Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer. POWER INPUT 1 2 4 3 6 5 7 8 9 INFO 0 RECALL SLEEP FREEZE C H .
Introduction Features l l l l l l l l l l l TV adopts 32" TFT LCD display screen Zero X radiation complies to green environment protection requirement Connect to computer directly to realize TV/monitor combo.
Introduction Specifications Model L32V11D-NZ Display size 32” Diagonal (max.) LCD panel resolution 1366X768 Speaker output power ≥5 W X2 Power supply ~110-240V, 50/60Hz TV receive system Digital: DVB-T Analog: PAL: BG, I, DK, SECAM: BG, D/K Frequency range Analog: Antenna: 46.25MHz-855.
Stand and wall-mounting instructions (KDL32MS82A) Hexagon bolt Stand Post Nylon gasket Nylon gasket Hexagon nut 9 2
General Description Overview of back panel You can connect the TV with video devices such as DVD/VCD player, VCR and video camera to enjoy the high quality picture.
General Description Overview of front panel The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control. MENU Press to see an on-screen menu of your TV's features. PROGr/s Press to change programs. In the on-screen menu, use the PROGr /sbuttons as up/down arrow buttons. VOLv/w Press to increase or decrease the volume. In the on-screen menu, use the VOLv/w buttons as left/right arrow buttons.
General Description Overview of Remote Control POWER INPUT 1 2 3 4 5 6 7 8 9 INFO 0 RECALL SLEEP FREEZE C H V FA .L IS T MENU OK/ REC LIST ID U EX IT G E DTV USB HDMI ASPECT MUTE VOL PROG AUDIO LANG BLUE RED GREEN YELLOW INDEX HOLD SIZE TEXT SUBTITLE MIX REVEAL CANCEL SOUND PICTURE PgUp PgDn TIME SUBCODE QT143 1. INPUT: This button is used to switch among different sources: DTV,ATV, AV1, AV2, Component, PC-RGB, HDMI1, HDMI2, USB.
General Description Overview of Remote Control POWER INPUT 1 2 3 4 5 6 7 8 9 INFO 0 RECALL SLEEP FREEZE C H V FA .L IS T MENU OK/ REC LIST EX IT E ID U G DTV USB HDMI ASPECT MUTE VOL PROG AUDIO LANG BLUE RED GREEN YELLOW INDEX HOLD SIZE TEXT SUBTITLE MIX REVEAL CANCEL SOUND PICTURE PgUp PgDn TIME SUBCODE QT143 17. USB: Switch to USB mode directly or call the control menu in USB mode. Please see the details in “Digital Media Player” on Page40 to Page49. 18.
General Description Overview of Remote Control POWER INPUT 1 2 3 4 5 6 7 8 9 INFO 0 RECALL SLEEP FREEZE C H V FA .L IS T MENU OK/ REC LIST I D U EX IT G E DTV USB HDMI ASPECT MUTE VOL PROG AUDIO LANG 13 RED GREEN YELLOW BLUE INDEX HOLD SIZE TEXT SUBTITLE MIX REVEAL CANCEL SOUND PICTURE PgUp PgDn TIME SUBCODE Teletext is an information system broadcast by certain channels which be consulted like a newspaper.
General Description Overview of Remote Control POWER INPUT 1 2 3 4 5 6 7 8 9 INFO 0 RECALL SLEEP FREEZE C H V FA .L IS T MENU OK/ REC LIST I D U EX IT G E DTV USB HDMI ASPECT MUTE VOL PROG AUDIO LANG RED GREEN YELLOW BLUE INDEX HOLD SIZE TEXT SUBTITLE MIX REVEAL SOUND PICTURE 13 13 CANCEL PgUp PgDn TIME SUBCODE CANCEL The CANCEL button will exit from any Teletext on the display. Press CANCEL button again to exit Teletext and return to live TV broadcast.
General Description Installing Batteries in the Remote Control Installing Batteries 1 Open the battery compartment cover on the back side. 2 Insert two 1.5V AAA size batteries in correct polarity. Don´t mix old or used batteries with new ones. ATV DTV HDMI SLEEP INPUT SOUND PICTURE ZOOM Point the remote towards the remote control sensor of the TV and use it within 8 meters. Put the used batteries into the recycling bin since they can negatively affect the environment. 3 Closed the cover.
External Connection Connecting VCR These instructions assume that you have already connected your TV to an antenna or a cable TV system. Skip step 1 if you have not yet connected to an antenna or a cable system.
External Connection Connecting a Camcorder The rear panel jacks on your TV make it easy to connect a camcorder to your TV. They allow you to view the camcorder tapes without using a VCR. Each Camcorder has a different back panel configuration. When connecting a Camcorder , match the color of the connection terminal to the cable. 1. Connect a Video Cable between the VIDEO terminal on the AV cable (1) and the VIDEO OUT jack on the camcorder. 2.
External Connection Connecting a DVD Player/Set-Top Box The rear panel jacks on your TV make it easy to connect a DVD to your TV. Component video separates the video into Y (Luminance (brightness)), Pb (Blue) and Pr (Red) for enhanced video quality. Be sure to match the component video and audio connections. For example, if connecting the video cable to COMPONENT IN, connect the audio cable to COMPONENT IN also. Each DVD player/STB has a different back panel configuration.
External Connection Connecting a DVD Player/Set-Top Box via DVI This connection can only be made if there is a DVI Output connector on the external device. TV Rear Panel 1 DVI to HDMI Cable (Not supplied) 2 Audio Cable (Not supplied) White DVD Player/ Set-Top Box Red Each DVD player/STB has a different back panel configuration. When connecting a DVD player/STB, match the color of the connection terminal to the cable. 1.
External Connection Connecting DVD Player/Set-Top Box via HDMI This connection can only be made if there is a HDMI Output connector on the external device. TV Rear Panel HDMI Cable (Not supplied) DVD Player/ Set-Top Box What is HDMI? HDMI, or high-definition multimedia interface, is a next-generation interface that enables the transmission of digital audio and video signals using a single cable without compression.
External Connection Connecting Digital Audio System The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV. Black TV Rear Panel Coaxial Cable (Not supplied) Digital Audio System 5.1 CH audio is possible when the TV is connected to an external device supporting 5.1 CH. 1. Connect an Coaxial Cable between the SPDIF jacks on the TV and the Digital Audio Input jacks on the Digital Audio System.
External Connection Connecting PC TV Rear Panel PC 1 D-Sub Cable (Not supplied) 2 PC Audio Cable (Not supplied) Each PC has a different back panel configuration. The HDMI jacks do not support PC connection. 1. Connect a D-Sub Cable between VGA AUDIO IN connector on the TV and the PC output connector on your computer. 2. Connect a PC Audio Cable between VGA AUDIO IN jack on the TV and the Audio Out jack of the soundcard on your computer.
Basic Operation Turning the TV On and Off 1 How to turn the TV on or off 1. Insert the power cord plug into a polarized AC outlet. 2. If TV is in standby mode Press POWER button on the remote control or button on the bottom panel of LCD TV. 3. Normal picture will be displayed on the screen after 15 seconds. If no signal input, "No Signal" will be displayed on the screen. 4. If temporary POWER off is required, press POWER button on the remote control or button on the bottom panel. 5.
Basic Operation Menu operation 1 Input Setup Press INPUT key on the remote control to enter "INPUT SOURCE" menu. There are nine options for you to select: DTV, ATV, AV1, AV2, Component, PC-RGB, HDMI1, HDMI2 and USB Use ▲/qkey to move the cursor to the input you desired and press OK key to confirm. Input Source DTV ATV AV 1 AV 2 Component PC-RGB HDMI1 HDMI2 USB 2 Channels Selection There are four ways to select channel: 1) Using number keys, and OK keys on the remote control to select channel directly.
Basic Operation Menu operation 4 Current Channel Information Press INFO key on the remote control to view current channel information, the indications of channel information are listed in the following table. 9 Nine Digital DTV 576i SD Subtitle Age 11 Nine Digital THE SHAK 09:41 Wednesday 17 Jun 2009 DOLBY MPEG 12:00 10:47 NEXT Fears Ahhhh, it’s time to face your fears!! it’s a scary day at The Shak with the theme of Fears-Eco. Curio. Press EXIT key on the remote control to exit this OSD.
Basic Operation Menu operation Prev.Day: If you press the red key on the remote controller, It will showPrevious Day’s programs. Next Day: If you press the green key on the remote controller, It will show Next Day’s programs. Schedule: If you press the yellow key on the remote controller, It will show the reminder list. Reminder: If you press the blue key on the remote controller, It will show a command window, and you can set the reserve programs.
Menu system instruction Picture Standard: Selects the picture for optimum display in a normal environment. Mild: Selects the picture for comfortable display in a dark room. Bright: Selects the picture for high-definition in a bright room. User: Select to view your favorite display settings (see User settings for PICTURE). Sports: Selects the picture for high-definition in a bright room.
Menu system instruction Sound SOUND 1. Press MENU key to display the main menu on the screen. 2. Press p/q key to select "Sound" option. 3. Press u key to enter "Sound" submenu. 4. You can also press the SOUND key on the remote control to select one of the sound settings. Sound Mode Balance Surround Sound Auto Volume SPDIF Mode Equalizer Standard 0 Off Off PCM Sound Mode You can select the type of special sound settings to be used when watching a given broadcast.
Menu system instruction Sound Surround Sound This is used to turn on surround sound to gain better sound effect. 1. Press p/q key to select "Surround sound" option. 2. Press t/u key to select “Surround” or “Off”. Auto Volume Each broadcasting station has its own signal conditions, and it is inconvenient to adjust the volume every time the channel is changed.
Menu system instruction 1. Press MENU key to display the main menu on the screen. 2. Press p/q key to select "Channel" option. 3. Press ukey to enter "Channel" submenu. Auto Search Press p/q key to select "Auto Search" option. Then press OK or u key to start a notice window. In this notice window, you can select country in the “Country Selection” option and set “Tune Type” option.
Menu system instruction Channel DTV Manual Search DTV Manual Search In the DTV source, you can choose “DTV Manual Search” to enter “DTV Manual Search” menu. You can use /button to choose the channel number and press OK button to enter searching, and then the TV will store the DTV channel if there is a DTV signal present.
Menu system instruction 1. Press MENU key to display the main menu on the screen. 2. Press p/q key to select "Time" option. 3. Press u key to enter "Time" submenu. TIME Time Clock 10:02 On Time Off Time Sleep Timer Time Zone Off Off Off WA Clock You can modify the time of your TV set, but when you switch to DTV program, the "Clock" is decided by the signal from your antenna.
Menu system instruction Option OPTION 1. Press MENU key to display the main menu on the screen. 2. Press p/q key to select "Option" option. 3. Press u key to enter "Option" submenu. OSD Setting You can modify the OSD setting to suit your user preferences. Screen Saver This option is only used in ATV mode. 1.Press p/q key to select “Screen Save” option. 2.Press t/u to choose on or off. Screen Saver Aspect Ratio Reset Lock Software updata(USB) Hearing Impaired PVR File System Select OPTION 1.
Menu system instruction Option Lock The lock feature requires a Password to be entered before any settings can be changed. 1. Press MENU key to display the main menu on the screen. 2. Press p/q key and select "Lock" under the "Option" menu. 3. Press OK or u key to enter "Lock" submenu, "Enter Password" menu will appear, enter your 4-digit password to enter "Lock" submenu (the default and universal password is 0000, the almighty password is 1980). Lock System 1. Press p/q key to select "Lock System" option.
Menu system instruction Function Noise Reduction 1. Press p/qkey to select "Noise Reduction" option. 2. Presstu / key to select "Off", "Low", "Middle", "High" to improve the picture sharpness. Note: Noise Reduction doesn't work in VGA Mode. FUNCTION 1. Press MENU key to display the main menu on the screen. 2. Press p/q key to select "Function" option. 3. Press u key to enter “Function” submenu.
Menu system instruction Secondary Audio Language 1.Pressp/q key to select "Secondary Audio Language" option. 2.Presst / u key to set Secondary Audio Language. Primary Subtitle Language 1.Pressp/q key to select "Primary Subtitle Language" option. 2.Presst / ukey to set Primary Subtitle Language. Secondary Subtitle Language 1.Pressp/q key to select "Secondary Subtitle Language" option. 2.Presst / ukey to set Secondary Subtitle Language. PVR PVR File System WARNING: 1.
Menu system instruction PVR Time Shift Size: This setting is available to adjust only after the disk has been formatted. The maximum Time Shift Size is 8G. Speed: Display the disk writing/reading speed. Please note: It is suggested that you use a disk with speed that is greaterthan 4500KB/S. Disk Remaining Space: Display the remaning space for PVR. NOTE: The times listed are not precise, only for reference.
Menu system instruction PVR Instant recording 1. Select the desired channel then press the RECORD button on the remote control to start recording the current broadcast, a progress bar will be displayed at the bottom of the screen. - During recording, the progress bar will fade out after 10 seconds. 2. Recording stops when you press the STOP button and the recorded file is stored in the external USB device automatically. NOTE: You can only watch channels on the same frequency as the program being recorded.
Digital Media Player Introduction This TV is embedded with one USB port digital media player. It can find devices that support USB1.1/2.0,including flash disk, USB hard disk and digital camera. It supports functions as: Display pictures, Play music files, Play video files, Display text files. Note: please do not remove the cable during the data transfer. It may cause problems for the system.
Digital Media Player Device and File Management Initialization Interface Enter the USB channel, the interface shown in Figure 1. If no inserted U disk, the system will be prompted to insert the USB device, while the lower right corner screen displays "No Device" message. When you insert a U disk, select the first letter located in the C drive, shown in Figure 2. The corresponding buttons as follows: Left and right keys: Select the drive letter. Enter key: to enter the selected letter.
Digital Media Player USB support character Play Control menu 1.JPEG Play Prev Next Play Prev Next Rotate ProportionPlayMode Music Stop Key operation Left, Right: Select Options OK button: the selected function key to enter the selected secondary function key menu. Play 1.JPEG Play / Pause: Play / Pause Picture. Prev: Play previous picture. Next: Play the next picture. Rotate: Rotate the image counter-clockwise along. (Shown as Figure 6) Stop Pos-Spin Neg-Spin Proportion 1.
Digital Media Player USB support character Playlist: Show all the image file. 1.JPEG Shown as Figure 10 Up,Down Keys: select the image file. OK button: Play the selected picture file. Left, Right keys: Exit playlist, and select other options. Exit button: Exit Playlists. Info: Display the name of the picture playback, resolution, size and date. (Shown as Figure 11) Playlist Info Playlist Water lilies.jpg Blue hills.jpg Winter.jpg Sunset.jpg nga_549617.jpg 1/1 UP / Down: select OK:play 1.
Digital Media Player USB support character Function: Bonnie Winds.mp3 Play Play / Pause: Play / stop the music FB: Fast back playing (x2,x4,x8,x16) FF: Fast forward playing (x2,x4,x8,x16) Prev: Play previous music Next: play next music FB 00:00:03/00:04:07 FF Prev Next PlayMode Stop Playlist ByOrder Single PlayLoop Play mode: Shown as Figure 15 1.ByOrder: Play music as order 2.Signle: Repeat single music 3.PlayLoop:Play all the music in order loop. Bonnie Winds.
Digital Media Player USB support character PLAY Video Video player interface Shown as Figure 19 Action: Left, Right: rewind / fast forward Up, Down key: previous / the next one Exit: exit the video player interface, return to video browsing interface. Menu key: enter the playback control menu. Shown as Figure 20 Ad.
Digital Media Player USB support character Ad.mpeg Play Mode: Shown as Figure 24 Play FB 00:00:03/00:04:07 FF Prev Next Switch ProportionPlayMode 1.ByOrder: Play video as order. 2.Signle: Repeat single video. 3.PlayLoop:Play all the video in order loop. ByOrder Single PlayLoop A->B: A to B repeat playback of video between points Set A: select the starting point. Shown as Figure 25. Set B: select the destination point . Shown as Figure 26. Ad.
Digital Media Player USB support character Current Disk: Set "Photo", "music", "video", "document" for the entire query path specified disk. This option is selected, each time a user visit the "Photo", "music", When this option is select, each time user visit the PHOTO, MUSIC, VIDEO, TEXT user can access to all the photos/musics/videos/texts contained in current disk.
Troubleshooting If you have any problem, check the couter measures for each symptom listed beiow. The following symptoms may have been . caused by inappropriate adjustment rather than actual malfunction of the unit. If the trouble persists, contact the Customer Care Centre, see back page for contact details . Symptoms Possible solutions No power Please check the power cord plugged in and that the power outlet works . Unplug the power cord and plug it in after 60 seconds and restart the TV.
Troubleshooting After Auto Tuning only some channels are available Check your area is covered by Digital Video Broadcasts. Try re-tuning or manually tuning missing channels. Check that you are using the correct antenna type - please see pg.16 'Antenna connection'. Channel cannot be selected Check if the channel has been blocked in the main menu settings. USB not playing Please check connecting USB cable and power supply is connected.Hard drive has not been formatted.
Picture defects and the reason Ghosting may also occur when still pictures are displayed continuously. It may disappear after a few moments.
39038462
