Clock Radio Instruction Manual M102K -AU M102W -AU
SAFETY INFORMATION CONTINUED . . CONTENTS The carton should contain: 1xClock Radio with Mirror Finishing 1xInstruction Manual 1xWarranty card LOCATION .
Display and Controls LED DISPLAY 1 PM ALARM1 FM ALARM2 4 3 2 CONTROLS AND CONNECTION 5 6 12 13 1.PM 2.FM 3.ALARM2 4.ALARM1 5.FM Aerial 6.Clock Set Button 7.Alarm Set Button 8.Reset Hole 7 8 9 14 10 15 16 9.Tune Up/adjust Up Button 10.Tune Down/adjust Down Button 11.Power Cord 12.Radio Button 13.Sleep Button 14.Snooze Button 15.Alarm Mode Switch 16.
Basic Operation FITTING BACKUP BATTERY You can insert a battery(not supplied) into your clock radio to retain clock and alarm settings in the event of a power cut. If the radio loses the time setting during a power cut ,the battery may need to be replaced. Fitting/replacing a battery: 1. Press the catch on the battery cover. 2. While holding the catch , lift the cover of the battery compartment. 3.
Basic Operation GETTING STARTED Before connecting the power, check that the main voltage on the rating plate under the radio is the same as the voltage in your area. Plug the AC power cord into the wall socket and switch the main power on ,The unit is now ready for use. SETTING THE CLOCK The clock is set manually. The clock displays the time in 24 hour format (for example,2a.m.is displayed as 2:00,2p.m.is displayed as 14:00). When setting the time or alarm, ensure that you are setting times in this format.
Basic Operation SETTING THE ALARM TIME The clock provide dual alarm setting ,set the Alarm mode switch to the Buzzer or Radio position, depending on your wake-up preference, the alarm indicator will light. NOTE: It is not possible to set the alarm when the Alarm mode switch is set to alarm off. 1.Press the alarm button, the hour digits will flash. 2.Press the or button to set the hour digits to the correct time. 3.Press the alarm button again, the minute digit will flash. 4.
MD120702-01
