Portable Bluetooth Speaker HOTLINE AUSTRALIA :1300765 663 NEW ZEALAND:0800 100 236 MD140320-01 Printed in China www.soniq.
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit.
LOCATION OF CONTROLS Top View BATTERY CHARGING INSTRUCTION BATTERY CHARGING INSTRUCTION This unit operates on a built-in Li-ion battery that can be recharged either using the USB port on your computer or from a USB power adaptor (not included) with a rated output of DC 5V 500mA and up. Note: The mini USB CHARGING JACK located on this unit is only designed for charging the built-in Li-ion battery. CHARGING THE BATTERY FOR FIRST TIME 1.
OPERATING THE SPEAKER IN BLUETOOTH MODE OPERATING THE SPEAKER IN BLUETOOTH MODE Bluetooth involves a technology for wireless radio connection of devices over a short distance. Devices with Bluetooth standard are transmitting between 2.402 and 2.480 GHz in the ISM band (Industrial, Scientific and Medical). Interference can be caused, for example by WLAN-networks, DAB radios, cordless phones, or microwave ovens which work on the same frequency band.
TROUBLESHOOTING GUIDE/SPECIFICATIONS NO Sound The built-in battery is dead. Recharge the battery. The MB402 is not linked with the cell phone. Go through “Speaker Operations” process to link the speaker. Volume set too low. Increase the volume of your device. Speaker is not paired to the audio source. Check whether a connection exists. If necessary, pair the speaker again to the audio source.
