Contents 1 Important................................................................................................................................ 4-5 Safety and important notice.....................................................................................................4-5 2 Your Product...........................................................................................................................6-8 Regions codes.........................................................................
Important • THE MAINS PLUG IS USED AS THE DISCONNECT DEVICE, THE DISCONNECT DEVICE SHALL BE READILY OPERABLE. Safety and important notice WARNING: • TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: This product employs a Laser System(Class 1M). This BD DVD player employs a Laser System. To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference.
Important Notice for Trademark Manufactured under license under U.S. Patent #'s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks, & DTS-HD, DTS-HD Master Audio, and the DTS logos are trademarks of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.
�������������� Your ������������ Product Regions Codes Region Both the Blu-ray Disc player and the discs are coded by region. These regional codes must match in order to play the disc. If the codes do not match, the disc will not play. The Region Number for this Blu-ray Disc player is described on the rear panel of the Blu-ray Disc player. Region U.S.A. and Canada regions U.K.
Your ������������ Product Product overview Main Unit NO 3 2 1 4 5 6 7 8 9 Control Function a STANDBY button Turns the power on or restores the unit to the standby mode. b Disc compartment Loads a disc into the disc drive. c Z Open or close the disc compartment. d . Search backward. e > Search forward. f B/[[ Playback/Pause. Connect a USB flash drive. g h IR Sensor Point the remote control at the IR sensor.
��������������� Your ������������ Product Remote Control 16 1 15 2 14 3 4 13 5 3 4 12 7 5 6 6 11 7 8 9 8 10 11 9 10 12 13 14 1 2 | ON / STANDBY • To switch the DVD player to ON or standby mode. SETUP • Enters or exits the system setup menu. MC • To OPEN/CLOSE Media Center. When there is no disc or DVD is in stop mode, press MC button to switch between DVD and USB mode. 15 16 - - ANGLE • Switch the camera angle during playback.
��������� Connect ������� Make the following connection to use this product. Y Connecting to a TV Pb Pr AUDIO IN Connect the product to TV to view disc play, Select the best video connection that TV can suport: Option 1: Connect to the composite video jacks Option 2: Connect to the component video jacks Option 3: Connect to the HDMI Jack. 1. Connect the component video cables from the Y Pb Pr jack on this unit to the corresponding component video input jacks on your TV. 2.
Connect Optional Connection Option 1: Connect to digital amplifier/ receiver Option 2: Connect to analogue stereo system Option 3: Connect network. 1. Connect the network cable from the LAN jack on the player to the LAN jack on the system. Option 1: Connect to the digital amplifer/receiver Round the sound from this player to other device to enhance audio play. Connect USB device A USB device provides an additional memory to software updates and enjoy BD-Live bonus content.
������������� Preparation ����������� Always follow the instructions in this chapter in sequence. Note: - Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Setting up the player Find the correct viewing channel 1.Press 2 to turn on this product. 2.
���������� Playback �������� playback completely. Playback Functions Basic Playback 1. Press 1/STANDBY switch on the front panel or the remote control, your player will turn on. The unit will take around 30 seconds to warm up. 3. Press PLAY to resume playback from the point where playback is pre-stopped or from the beginning of the disc after the playback is completely stopped. Not all Blu-ray Discs support the resume feature. Fast Forward and Fast Reverse 1. Press F.
Playback SUBTITLE Press this button repeatedly and the screen will display “X/XX XXX” and “SUBTITLE Off”. The “X” indicates the current number of this language; “XX” indicates the total number of language; “XXX” indicates the language name. The number of available languages depends on the disc.
Playback Red(Program)/Yellow(Clear) During CD/DVD/VCD playback ,you can use Program to edit the track onto the CD or the chapter onto the DVD. then press / to select track/chapter to press Clear to delete track/chapter. DIGEST During playback JPEG disc, press DIGEST to view a page of 12 thumbnail images. - Use / / / to select an image. Press OK to view the selected image in full-screen and subsequent images will be displayed one after another automatically.
Customizing Electronics Control) protocol. You can use one single remote control to control all EasyLink-compliant devices that are connected through HDMI connectors. {On} - Turns on EasyLink features. {Off} - Disables EasyLink features. • [Disc Auto Upgrade] Turn on or Off the disc automatic upgrade switching models. {On} - Start upgrade from the insert disc. {Off} - Disable disc auto upgrade mode. • [Load Default] Reset all settings of DVD player to intial default state.
Customizing 6�������� . Press OK, enter Resolution setting. Enter key is pressed. Notes: - If set [Disc Auto Upgrade]to [Off], after you insert the disc that contains the upgraded infromation to upgrade system, you have to start upgrade from this option of Setup Menu. - If the upgrade file package did not pass the verification, error prompt is displayed , check the package again (such as the package is not complete) - Make sure the firmware version is not an old version.
Customizing [Playback] Control) menu, which allow you to interact with the system via menu. {On} – Display playback control menu, use NUMBER keys to select desired option. {Off} – Hiden playback control menu and start playback from track1 automatically. • [DivX(R) VOD DRM] Select DivX(R) VOD DRM option to see your registration code in order to view DivX(R) Video. The DivX(R) means DivX(R) Video on Demand Digital Right Management.
Customizing • [Country Code] ... General Setting ... System Language Playback Security CEC On New password Disc Auto Upgrade Confirm password Load Default Network This ensures you see the scenes intended for your current residential region/country. Use 0-9 keys to enter the country code.
Customizing {Manual} – Manual setup network information. • [BD-Line Connection] {Permitted} – During playback BD-Live disc, the disc may automatically downloading all information from appointed network. {Partial Permitted} – During playback BD-Live disc, the disc may automatically downloading the part of information from appointed network. {Prohibited} – Disable downloading information from network. • [Proxy Setting] {Enable} – Automatically obtained proxy information.
Customizing • • • • • {16:9 Normal} – For a disc with the aspect ration of 4:3, the output video is resized vertically to match what will be seen on the display. {4:3 Pan&Scan} – For standard TV, Display a wide picture on the entire screen and cuts off the redundant portions. {4:3 Letterbox} – For standard TV, Display a wide picture with two black borders on the top and bottom of 4:3 screen. [Resolution] Select a video output resolution that is compatible with your TV display capability.
Customizing {Bitstream} – output digital signal without any processing. {PCM} – output digital signal with processing, only two channels export. When Connect a HDMI cable from the HDMI OUTPUT jack on this product to the HDMI input jack on the TV, output multi channels export. {Reencode} – Auto select signal type from Digital Out jack according to the Audio streamon disc. {Off} – Disconnet bit stream export.
Specification Playback media Main Unit • Power supply rating: 110V-240, 50HZ/60HZ • Power consumption: 25W • Power consumption in standby mode: <1W • Dimensions (w x h x d): 430×45×225 (mm) • Net Weight: 2.3 kg BD-Video, BD R V2.0/BD RE V2.x, BD RE V3.0, DVD-Video, DVD+R/+RW, DVD-R/-RW, CD-R/CD-RW, Audio CD, Video CD/SVCD, Picture CD. Video Signal system:PAL/NTSC Composite video output: 1Vp-p (75 ohm).
Troubleshooting ���������������� If you experience any of the following difficulties while using this unit, check the list below before consulting your nearest dealer. Problem Tip No reaction to the remote control. Connect the product to the power outlet. Point the remote control at the product. Insert the batteries correctly. Insert new batteries in the remote control. No video signal on the display device. Turn on the TV. Set the TV to the correct external input.
Troubleshooting ���������������� Cannot play back a disc. Make sure that the product supports the disc. Make sure that the Blu-ray Disc player supports the region code of the DVD or BD. For DVD+RW/+R or DVD-RW/-R, make sure that the disc is finalized. Clean the disc. Cannot play back JPEG files from a disc. Make sure that the disc was recorded in the UDF, ISO9660 or JOLIET format. Cannot play back Windows Media TM Audio files from a disc.
Glossary Aspect ratio Aspect ratio refers to the length to height ratio of TV screens. The ratio of a standard TV is 4:3, while the ratio of a high-definition or wide TV is 16:9. The letter box allows you to enjoy a picture with a wider perspective on a standard 4:3 screen. Blu-ray Disc (BD) Blu-ray Disc is a next generation optical video disc capable of storing five times more data than a conventional DVD.
Glossary HDMI High-Definition Multimedia Interface (HDMI) is a high-speed digital interface that can transmit uncompressed high definition video and digital multichannel audio. It delivers high quality picture and sound quality, completely free from noise. HDMI is fully backward-compatible with DVI. As required by the HDMI standard, connecting to HDMI or DVI products without HDCP (High-bandwidth Digital Content Protection) will result in no Video or Audio output. PBC Playback Control.
